Analytical determination of the frequency of short circuits of the arc at surfacing in gas dioxide with welding pool mechanical oscillations
Journal Title: Журнал інженерних наук - Year 2017, Vol 4, Issue 1
Abstract
A hypothesis has been put forward that it is possible to reduce the degree of splashing when sur-facing into carbon dioxide due to the setting of the frequency characteristics of the oscillation of the weld pool. Equations are presented that are the result of theoretical research, on the basis of which an expression for the short-circuits frequency of the inter-arc gap in the process of surfacing by on a direct current is determined. On the basis of brief literature analysis of the works past years old its is showed that the fre-quency imposed on the welding pool has to detected by crystallization frequency near the crystalliza-tion front melt which is detected by a surfacing velocity and crystallization characteristics of weld pool metal. Due to the fact that for present day the strict theory of crystallization in the conditions outer oscillations haven't created, the dependencies for an amplitude-frequency characteristic’s de-termining which were got by different researchers have been presented. The example of calculation of an arc burning time and time of short circuit in period of surfacing process have been presented. On the basis of that, frequency of short circuits has been determined.
Authors and Affiliations
V. Lebedev, S. Novikov
Keywords
Related Articles
- EP ID EP240068
- DOI -
- Views 58
- Downloads 0
Research of Working Process of Vortex Expansion Machine with Side Channel
At gas distribution stations, a large amount of energy of compressed gases is lost. In such cases, the useful power is obtained with the aid of a turboexpander. The problem is that there is a great need for turboexpander...
Mathematical simulation of fluid flow and analysis of flow pattern in the flow path of low-head Kaplan turbine
The results of numerical investigation of spatial flow of viscous incompressible fluid in flow part of Kaplan turbine PL20 Kremenchug HPP at optimum setting angle of runner blade φb = 15° and at maximum setting angle φb...
Influence of an Inlet Rotating Axial Device on the Cavitation Processes in a Low Specific Speed Centrifugal Pump
The paper is devoted to the analysis of the cavitation processes in the flow section of the low specific speed centrifugal pump. A new conception of double-entry hermetic pump leads to the application of special shaped i...
Features of Geochemical Migration of Chemical Elements after Technogenic Loading of Pyrogenic Nature
The study of the concentration of trace metals in soils by atomic absorption analysis was carried out. The results indicate the transformation of their migration properties. The diversity and versatility of behavior of c...
Directions of the environmental protection processes optimization at heat power engineering enterprises
The article observes the impact factors of heat power engineering enterprises on the environment and ways of anthropogenic impact reduction during the application of ecological security control technological methods. The...