ANALYTICAL MODELLING OF KARMAN VORTEX STREET
Journal Title: Metrology and Measurement Systems - Year 2005, Vol 12, Issue 4
Abstract
A new approach to the Karman vortex street modelling is presented. The model is based on observations of the Karman vortex street. The idea of the model is based on fundamental mechanical formulas. According to the model, vortices are created on the bluff body surface in the area of the boundary separation. The grow-up of the vortex results from the process looking like a reeling of some amount of the liquid on the vortex core during its rolling downstream on the surface of unmoved stagnation region. This process is represented in the model as a succeeding addition layer attachment. The vortex evolution has been divided into three stages. Hence three zones downstream the bluff body are distinguished: intensive development, stabilization and vortices decay. Influence of the fluid viscosity on the development process and rotation energy of the vortex has been also analyzed.
Authors and Affiliations
G. PANKANIN, J. BERLIŃSKI, R. CHMIELEWSKI
Keywords
Related Articles
- EP ID EP144607
- DOI -
- Views 60
- Downloads 0
FREQUENCY INDEXES OF RESPIRATION DURING INTERRUPTER EXPERIMENT
A new issue of the respiratory mechanics evaluation by the frequency mode of the interrupter technique is undertaken in the paper. The aim of the computer-aided research is to show the abilities to separate airways and t...
PROF. DR HAB. INŻ. STANISŁAW ADAMCZAK HONORIS CAUSA DOCTORATE, UNIVERSITY OF ZILINA (SLOVAKIA)
On 16 November 2007, Prof. dr hab. inż. Stanisław Adamczak, Dean of the Faculty of Mechatronics and Machine Building at the Kielce University of Technology, member of the Committee on Metrology and Research Equipment and...
A MULTI-DSP BASED INSTRUMENT FOR REAL-TIME ENERGY AND PQ MEASUREMENTS
The evaluation of electrical energy flows is at the base of all operations connected to commercial transactions on the energy market. Typically, the measurement apparatuses are made and characterized to work in ideal sin...
CALIBRATION OF REFERENCE STANDARD QUARTZ ROTATING PLATES
An accurate linear polarized optical system for calibrating the quartz plate angles is introduced in this work. The quartz plate parallelism and surface roughness are measured using a phase shifting laser interferometer...
SMART SENSOR SOLUTIONS FOR MECHANICAL MEASUREMENTS AND DIAGNOSTICS
Application of many sensors located on a mechanical structure causes serious technical problems. One of the main problems is wiring of sensors which is time-consuming and may change the system output due to high structur...