Analytical Study of Sio2-Water Based Nano Fluid Flow in A Rotating Frame With Thermo Phoresis
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 4
Abstract
The problem of unsteady MHD free convection flow of SIO2- H2O nano-fluid through a porous medium bounded by a vertical semi-infinite permeable flat plate with constant heat source and convective boundary condition in a rotating frame of reference is performed, theoretically. The plate is assumed to oscillate in time with steady frequency, so that the solutions of the boundary layer are the same oscillatory types. The entire system rotates about the axes normal to the plate. The dimensionless governing equations for this investigation are solved analytically using perturbation approximation. The effects of various parameters on the flow, heat and mass transfer characteristics are discussed through graphs.
Authors and Affiliations
Uday Kumar. Y, Dharmaiah . G, Sreenivasa Kumar . M
Keywords
Related Articles
- EP ID EP655688
- DOI 10.24247/ijmperdaug201943
- Views 85
- Downloads 0
Effect of EGR on Performance of CI Engine with Diesel and Cotton Seed Oil as Fuels
Automobile emission is one of the major problems in the environment. Engine emits the carbon monoxide (CO), unburnt hydrocarbon (HC) and smoke density, etc and causing a variety of health and environmental problems at th...
A Review on Non-Circular Journal Bearings
Hydrodynamic bearings depend on the high journal speed to move the pressurized fluid in a wedge between the faces. Instabilities due to oil whip and whirl are usually observed when using hydrodynamic circular journal bea...
An Effect of Stress Relieving on the Microstructural and Mechanical Properties of Mg-3Zn-1Cu-0.7Mn/ Al2O3 Composite Synthesized by Powder Metallurgy
A composite based on Mg-3Zn-1Cu-0.7Mn alloy reinforced withAl2O3was synthesized using blend-press-sinter powder metallurgy route and hot extruded at 400oC. The study concentrates on investigating the effectiveness of alu...
Study of Influence of Tool Geometry on Material Flow Pattern in Friction Stir Welding Process Using Finite Element Simulation
Material flow pattern studies are conducted during the friction stir welding process, to evaluate the influence of tool geometry on the flow characteristics. This is done considering the material movement in the case of...
Flexural Analysis of Smart Structural Composite Laminates by Using a New Higher Order Theory
The present article involved the enrichment of a higher order shear deformation theory especially for composite laminates embedded with piezoelectric materials under electro-mechanical loading. The main aim of the presen...