Anthropomorphic Solid Structures n-R Kinematics
Journal Title: American Journal of Engineering and Applied Sciences - Year 2017, Vol 10, Issue 1
Abstract
Abstract This paper presents and treats (in an original way) the specific elements of the structures of robotic solid mobile anthropomorphic type. Are "placed on the wallpaper", the geometry and kinematics of the anthropomorphic robotic solid systems, in an original vision of the authors. One presents the inverse kinematics of anthropomorphic systems, with mechanical elements and points: Geometry, cinematic, positions, displacements, velocities and accelerations. They will be presented further two methods (as the most representatives): First one the method trigonometric and second one the geometric method. Copyright © 2017 Relly Victoria V. Petrescu, Raffaella Aversa, Bilal Akash, Ronald B. Bucinell, Juan M. Corchado, Filippo Berto, MirMilad Mirsayar, Antonio Apicella and Florian Ion T. Petrescu. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Authors and Affiliations
Relly Victoria V. Petrescu, Raffaella Aversa, Bilal Akash, Ronald B. Bucinell, Juan M. Corchado, Filippo Berto, MirMilad Mirsayar, Antonio Apicella, Florian Ion T. Petrescu
Keywords
Related Articles
- EP ID EP201384
- DOI 10.3844/ajeassp.2017.279.291
- Views 103
- Downloads 0
An NPV Optimization Model for Closed-Loop Supply Chain Network Design and Planning
Abstract As the importance of forward-reverse logistics increases, attention will be focused on parameters which affect Net Present Value (NPV) of the whole system, aiming at considering the time value of money in plann...
Adaptive Video Quality Model for UHD Video Broadcasting Using the Principle of Inclusion
Adaptive Video Quality Model for UHD Video Broadcasting Using the Principle of Inclusion Urvashi Pal and Horace King DOI : 10.3844/ajeassp.2017.900.907 American Journal of Engineering and Applied Sciences Volume 10,...
p-n Junction of 1.95 nm Carbon Nanotube: Fabrication, Properties and Performance
Abstract Carbon Nanotube (CNT) is the substitution of silicon material for designing of transistor device due to the shortcoming of silicon properties. In this study, 1.95 nm diameter of CNT is fabricated and characteri...
Application of Titanium Dioxide Self-Cleaning Coatings on Photovoltaic Modules for Soiling Related Losses Reduction
Abstract Several studies have assessed the influence of soiling deposition on Photovoltaic (PV) modules front-cover with regards to performance losses over time. In fact, soiling phenomena in PV systems are ascribed as...
Energy Audit of Health Care Facilities: Dynamic Simulation of Energy Performances and Energy-Oriented Refurbishment of System and Equipment for Microclimatic Control
Abstract Topic of the study is the investigation of potentialities of energy simulation for optimizing the building refurbishment, by taking into account impacts of both envelope renovation and HVAC system selection. En...