p-n Junction of 1.95 nm Carbon Nanotube: Fabrication, Properties and Performance
Journal Title: American Journal of Engineering and Applied Sciences - Year 2017, Vol 10, Issue 2
Abstract
Abstract Carbon Nanotube (CNT) is the substitution of silicon material for designing of transistor device due to the shortcoming of silicon properties. In this study, 1.95 nm diameter of CNT is fabricated and characterized by analyzing of depletion width and I-V characteristics by realizing the p-n junction behavior. The p-n junction behavior of carbon nanotube is realized by applying self-consistency of the electrostatic potential and charge of CNT. The result shows that the variation of doping concentration happens in p-n junction due to the different cylindrical size of the carbon nanotube. Finally, the p-n junction current voltage transfer characteristics shows low current required for CNT device. Copyright © 2017 Soheli Farhana and Mohamad Fauzan Noordin. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Authors and Affiliations
Soheli Farhana, Mohamad Fauzan Noordin
Keywords
Related Articles
- EP ID EP194635
- DOI 10.3844/ajeassp.2017.511.516
- Views 77
- Downloads 0
Hands-On Fire Extinguisher Training Apparatuses: Expert Evaluations of Two Propane Fire Simulators and Air-Pressurized Water Extinguishers
Hands-On Fire Extinguisher Training Apparatuses: Expert Evaluations of Two Propane Fire Simulators and Air-Pressurized Water Extinguishers Awwad Dababneh, Abdul Jaleel Hamad Majeed and Rami H. Fouad DOI : 10.3844/ajeass...
Triton for Nuclear Fusion
Triton for Nuclear Fusion Raffaella Aversa, Relly Victoria Petrescu, Antonio Apicella, Samuel Kozaitis, MirMilad Mirsayar, Taher Abu-Lebdeh, Filippo Berto, Bilal Akash and Florian Ion Tiberiu Petrescu DOI : 10.3844/aje...
Future Medicine Services Robotics
Abstract It is an entry technique in use recently, albeit in selected centers and represents a further step in the field of minimally invasive surgery. Basically it has the same indications but, at present, is reserved...
Simulation and Experimental Analysis of a Demonstrative Solar Heating and Cooling Plant Installed in Naples (Italy)
Abstract In this study the model of a Solar Heating and Cooling (SHC) system and its experimental setup are presented. The SHC system under investigation is a demonstration plant installed in Naples, based on flat plate...
Discrete Vortex Prediction of Flow around Two Cylinders in Side by Side using Simple Grid System
Abstract Modelling of flows around two cylinders in side by side arrangement using a simple overlapping grid system is carried out. The use of such grid system is intended to give a considerable reduction in terms of th...