ANTI-SLIP PROPERTIES OF AERO SHELL GREASE 33 LUBRICANT AT USING OF STRUCTURAL STEELS 9ХС AND 30ХГСА
Journal Title: Проблеми тертя та зношування - Year 2018, Vol 78, Issue
Abstract
The influence of sliding speed during rolling with slip on the kinetics of the process of setting the material of contact surfaces in a local contact is considered when the tribosystem goes into the limiting and semi-dry lubrication regime. The regularities of the change in the extreme pressure properties of the lubricant under conditions of oil starvation and their relationship to the properties of the triboelement material are established. The regularities of the change in the thickness of the lubricating layer in the conditions of oil starvation during the lubrication of tribo-joint elements with oil Aero Shell Grease 33 are analyzed.
Authors and Affiliations
O. Ye YAKOBCHUK, R. G. MNATSAKANOV, О. А. МIKOSІANCHYK, A. N. KHIMKO, V. V. TOKARUK
Keywords
Related Articles
- EP ID EP366485
- DOI -
- Views 28
- Downloads 0
EXPERIMENTAL RESEARCHES OF ENERGY LOADING OF FRICTION PAIRS OF BAND-BLOCK BRAKES WITH AN AIR-LIQUID COOLING SYSTEM (part two)
In the materials of the article we’ve disclosed the mechanism for estimating the heat balance of the composite brake pulleys of the band-block brake at the forced air-liquid cooling of it’s matte and polished surfaces. T...
EXPERIMENTAL INVESTIGATION OF THE PROPERTIES OF GEOMODIFIERS IN FRICTION PAIRS
The paper presents the results of research on friction surfaces microprocessing using geomodi-fiers (GMF). Studies have been done on the content of GMF in oil in percent, which provides the required anti-friction propert...
INFLUENCE MECHANICAL ACTION ON FLEXIBLE PRINTED CIRCUIT BOARD
The article analyzes а flexible printed circuit boards in functional electronics deformation (bending, stretching, resonant strain), proposed methods of calculating the deformation of flexible printed circuit boards, and...
THE QUESTION OF THE USE OF DYNAMIC MODELS OF DISC BRAKES OF VEHICLES IN ACTUATORS OF HOIST-TRANSPORT MACHINES
A feature of modern lifting machines is the continuous improvement of their operational pa-rameters, such as payload, speed and depth of the lift, reducing the material consumption of equipment due to increased efficienc...
THE INFLUENCE OF THE SHAPE OF THE ARTIFICIAL ROUGH-NESS ON THE FLOW IN THE DIFFUSER CHANNEL
The influence of the shape of the artificial roughness elements on the flow in the diffuser channel was analyzed in the article. Calculations were carried out for Mach numbers in the range 0.2 ... 0.5. Elements of artifi...