THE QUESTION OF THE USE OF DYNAMIC MODELS OF DISC BRAKES OF VEHICLES IN ACTUATORS OF HOIST-TRANSPORT MACHINES
Journal Title: Проблеми тертя та зношування - Year 2017, Vol 75, Issue
Abstract
A feature of modern lifting machines is the continuous improvement of their operational pa-rameters, such as payload, speed and depth of the lift, reducing the material consumption of equipment due to increased efficiency, quality of operation and reliability of the control sys-tem. At the same time, it is necessary to maintain and even increase the level of reliability of the entire lift, due to the efficient and reliable operation of the modular disk-brake brake of the lifting machine. The materials of the article are devoted to the development of the friction pairs of the modular disk brake of the mine hoisting machine, based on the power and torque characteristics by using individual disc brakes of the front-axle of vehicles of various carrying capacity. The purpose of the work is to justify the possibility of using friction pairs of the front-axle disc brakes of vehicles of different carrying capacity as a dynamic model for the modular disk brake of mine hoisting machines. In this publication, the following issues are considered: design and operation of the modular disk brake of the mine hoisting machine; operating modes of the modular brake; а method for estimating of the energyloading of friction pairs of disk brakes of a mine hoisting machine. On the basis of the system approach, the possibility of forming equivalent series of friction pairs of a modular disk-shoe brake of mine hoisting machines of various carrying capacity is shown, using brake friction pairs in them, which, as a dynamic model, have been tested and researched on vehicles.
Authors and Affiliations
D. A. VOLCHENKO, A. V. VOZNYI, O. B. STADNYK, V. S. VYTVYTSKYI
Keywords
Related Articles
- EP ID EP324405
- DOI -
- Views 54
- Downloads 0
FORMATION OF TRIBOTECHNIKAL PROPERTIES OF PLASMA COATINGS ON STEEL 12C-Cr18-Ni10-Ti BY LASER TREATMENT
The questions of the strength of adhesion of plasma coatings with the base and their durabil-ity. These ways оf improving the quality of such coatings by melting coating and thin surface layer or base their repeated cycl...
METHODS OF ESTIMATION OF THERMAL CHARACTERISTICS OF METALLIC FRICTION ELEMENTS OF BRAKE DEVICES
The peculiarities of determining thermal characteristics of metallic friction elements of brake devices are illustrated. The method of regular mode for estimation the rates of heating and cooling the rims of metallic fr...
INTENSIFICATION OF THE FORCED COOLING OF THE FRICTION PAIRS OF THE BAND-BLOCK BRAKES OF DRAW-WORKS
The friction pairs of the band-block brake are washed by longitudinal and transverse air flows during forced cooling at electric thermal mechanical friction. Air flow affects at the longitudinal circulation of the air i...
Academician Ahad Hanahmad oglu Janahmadov creative career
Academician Ahad Hanahmad oglu Janahmadov creative career
THE INFLUENCE OF THE SHAPE OF THE ARTIFICIAL ROUGH-NESS ON THE FLOW IN THE DIFFUSER CHANNEL
The influence of the shape of the artificial roughness elements on the flow in the diffuser channel was analyzed in the article. Calculations were carried out for Mach numbers in the range 0.2 ... 0.5. Elements of artifi...