Application of calorimetry in evaluation of phase transformations in the selected hypoeutectic silumins
Journal Title: Archiwum Odlewnictwa - Year 2009, Vol 9, Issue 2
Abstract
The investigations of phase transformations described in this study were carried out on hypoeutectic alloys from the Al-Si during heating and cooling. The determination and analysis of characteristic temperature values from the solidification range was made by the DSC method in calorimetric investigations carried out on a high-temperature multi HTC Setaram scanning calorimeter. Applying the lever rule, the phase composition of the examined slumins was calculated and compared with the results of DSC calorimetry.
Authors and Affiliations
Jarosław Piątkowski, J. Szymszal
Keywords
Related Articles
- EP ID EP70429
- DOI -
- Views 155
- Downloads 0
Assessment of harmfulness of green sand with additions of dust from dry dedusting
Recently, in the literature about the problems cause to the environment by foundry industry, attention has been paid to the presence and harmful effect of aromatic hydrocarbons: benzene, toluene, ethylbenzene and isomers...
Three-dimensional numerical model of solidification with motion of the liquid phase
The paper presents numerical modeling of solidification process with convective motion of the liquid phase, generated both in the liquid and mushy zones. The transition region between the areas filled with liquid and sol...
Analysis of the Compounds from the BTEX Group, Emitted During Thermal Decomposition of Alkyd Resin
Suitability of the given binding agent for the moulding sands preparation depends on the one hand on the estimation of technological properties of the sand and the mould made of it and the obtained casting quality and on...
Total productive maintenance on example of automated foundry lines
Within framework of the presented study one has performed analysis of stoppages in automatic foundry lines operation, and basing on assumptions from complex maintenance system has undertaken himself to develop a service...
The comparative studies of ADI versus Hadfield cast steel wear resistance
The results of comparative studies of wear resistance of ADI versus high manganese Hadfield cast steel are presented. For evaluation of wear resistance three type of ADI were chosen. Two of them were of moderate strength...