Application of experimental design approach for optimization of the photocatalytic degradation of humic substances in aqueous solution using immobilized ZnO nanoparticles
Journal Title: Journal of Advances in Environmental Health Research (JAEHR) - Year 2015, Vol 3, Issue 3
Abstract
Degradation of humic substances in water is important due to its adverse effects on the environment and human health. The aim of this study was modeling and investigating the degradation of humic substances in water using immobilized ZnO as a catalyst. ZnO nanoparticles were synthesized through simple coprecipitation (CPT) method and immobilized on glass plates. The immobilized ZnO nanocatalyst was characterized through scanning electron microscopy (SEM) and X-ray diffraction (XRD). Response surface methodology (RSM) and central composite design (CCD) were used to create an experimental design for humic degradation and color removal efficiency. The most important parameters including initial concentration, pH, and contact time were optimized. The optimum conditions were initial concentration of 7.68 mg/l, pH of 4.42, and contact time of about 125.6 minutes. Under optimal conditions, maximum humic substances and color removal of about 100 and 82.37% were obtained, respectively. These results illustrate that an immobilized form of ZnO can be used as an efficient nanocatalyst for effective degradation of humic substances in water.
Authors and Affiliations
Hooshyar Hossini, Mahdi Safari, Reza Rezaee, Omid Giahi, Yahya Zandsalimi
Keywords
Related Articles
- EP ID EP420661
- DOI 10.22102/JAEHR.2015.40198
- Views 127
- Downloads 0
Removal of cesium through adsorption from aqueous solutions: a systematic review
Cesium radioactive isotopes (134Cs and 137Cs) are dangerous to human health due to their long half-life and high solubility in water. Nuclear experiments, wars, and nuclear plant accidents have been the main sources of C...
Spatial distribution and analysis of heavy metal pollution in urban roadside dusts from Sanandaj, Iran
Industrial activities and high traffic density are the most important heavy metal pollution sources in urban areas. Roadside dust created by atmospheric deposition can be one of the best indicators for heavy metal contam...
Chemical composition of indoor ash residues
The ash content formed after burning of materials in indoor may be harmful to environment on dumping due to high ionic and metallic concentration. Therefore, the chemical composition of various indoor ash residues derive...
Evaluation of Water Quality Using Heavy Metal Index and Multivariate Statistical Analysis in Lorestan Province, Iran
In the present study, the water quality of Silakhor River, located in Rahim Abad hydrometric station, was analyzed based on Boron, Iron, Nickel, Fluorine, Manganese, Chromium, Cadmium, Aluminum, Copper, Zinc and Lead pol...
A survey on fluoride, nitrate, iron, manganese and total hardness in drinking water of Fereidonkenar, Northern Iran during 2008-2013
The purpose of present study was to evaluate fluoride, nitrate, iron, manganese and total hardness in drinking water of wells and reservoirs in Fereidonkenar, Mazandaran, Northern Iran and compare the results with nation...