Application of QFD & VE & lean approach for control tests in a product design
Journal Title: Archives of Materials Science and Engineering - Year 2017, Vol 2, Issue 84
Abstract
Purpose: of this paper consists of identifying and prioritising control tests of a product design with integrating QFD and VE techniques according to use of the lean approach to increase the productivity of product design. Design/methodology/approach: of this research is the application of four quality houses at QFD (four matrices) and VE matrix and assessment table of lean approach in the form of a combinational process. Findings: of this research were the implementation of mentioned methodology for numerical application. Bullet-head drill (27.8 inch HSD) that was applied in oil and gas industries with 5.69 scores is more than moderate in related to lean of control tests, and it is 7.13 from 9 for average survey results of applied mentioned methodology, and also it is 0.825 for research reliability. Research limitations/implications: of this paper suggest that the wide use of the other non-statistical techniques of quality engineering can be achieved with simple programming in excel and lean approach. Even more advanced topics in fuzzy circumstance can be applied with this methodology. Originality/value: of this research is extracted from three matrices of QFD, one matrix of VE and assessment table of lean approach for prioritising the control tests in product design of bullet-head drill 27.8 inch HSD.
Authors and Affiliations
M. H. Karimi Gavareshki, M. Abbasi, R. Rostamkhani
Keywords
Related Articles
- EP ID EP189616
- DOI 10.5604/01.3001.0010.0980
- Views 150
- Downloads 0
Effect of ECAP process on structure and hardness of AlMg3 aluminium alloy
Purpose: In the present study, the effect of ECAP die and number of ECAP pressings on the structure evolution and hardness of AlMg3 aluminium alloy was investigated. Design/methodology/approach: Commercial AlMg3 aluminiu...
Numerical analysis of the cavitation effect occurring on the surface of steel constructional elements
Purpose: The aim of the work is to present the results of own investigations concerning the geometric optimisation of constructional elements working in the environment of cavitation wear together with a computer numeric...
The effect of CaF2 and BaF2 solid lubricants on wear resistance of laserborided 100CrMnSi6-4 bearing steel
Purpose: In this paper, laser alloying with boron and solid lubricants was used in order to produce the self-lubricating layer on 100CrMnSi6-4 bearing steel. The influence of CaF2 and BaF2 on microstructur...
The properties of experimental silicones reinforced with silica fillers for dentistry
Purpose: Silicone materials crosslinked during the hydrosilylation reaction are common indental prosthetics and dentistry. These materials are characterized by a relatively very goodproperties. However, one of the fundam...
Oxide layers on titanium obtained by anodizing in orthophosphoric acid
Purpose: Titanium is an essential material used in modern dentistry, mostly due to its tissue compatibility. However, there are another physicochemical assets, which can be harnessed. One of these is enhancing the bondin...