Application of time-series analysis in foundry production
Journal Title: Archiwum Odlewnictwa - Year 2009, Vol 9, Issue 3
Abstract
Characterization of the time-series analysis is presented, as a data mining tool which facilitates better understanding nature of manufacturing process and permits forecasting of future values of the process parameters or production results on the basis of the past data, recorded in regular intervals. The main methods and problems of the time-series analysis are presented, related to the trend function, evaluation of seasonality and significance of the information contents in the residual values. The authors’ research results, related to exemplary production data collected in a foundry with Disamatic molding line (temperature of the molding sand), are presented. It is concluded that a properly performed analysis of time-series can be a useful tool for analysis and predictions of foundry production process.
Authors and Affiliations
M. Perzyk, K. Krawiec, J. Kozłowski
Keywords
Related Articles
- EP ID EP72017
- DOI -
- Views 123
- Downloads 0
Influence of technological factors on eutectic silicon morphology in Al-Si alloys
From the background about Al-Si alloys modifying from eutectic silicon morphology and mechanical properties relation point of view is at solving of chosen technological problems used structural analysis and Si morphology...
Application of microjet in heat treatment of aluminium bronzes
Mechanical properties of a CuAl10Fe4Ni4 bronze subjected to solution heat treatment and toughening were examined. In solution heat treatment, a microjet was used to raise the cooling rate. A slight increase of mechanical...
Effect of ring notch radius on the decohesion mode in AlSi alloys
The article discusses the effect of the, determined by tensile test, non-linear characteristics of AlSi alloys on the value of the shape factor k for the three different sizes of the radius of the ring notch made on roun...
Experimental stand for melting and casting of ultralight Mg-Li alloys
The article presents the design guidelines and technical implementation of an experimental stand for melting and casting in controlled protective atmosphere the ultralight magnesium-lithium alloys, including also a small...
Macrostructure of IN-713C superalloy after volume modification
The study discusses the results of the preliminary investigations of the process of volume modification of nickel and cobalt superalloys. The investigations were carried out on an IN-713C alloy. As an inoculant, cobalt a...