APPLICATION OF VEGETABLE OILS FOR THE FRICTION PAIR MODIFICATED WITH A BORON
Journal Title: Tribologia - Year 2018, Vol 279, Issue 3
Abstract
In the article, the results of the conducted research were discussed, and the aim was the evaluation of the characteristics of the operation of sliding pairs when vegetable oils are used for lubrication. Particularly, friction pairs with hard layers containing boron were taken into account. For comparison, two of the most common vegetable oils were used during the tests. Rapeseed oil was chosen, since it is most frequently applied in Europe, soybean oil was chosen due to its occurrence in North American areas. The oils are also applied in industry for commercial aims as oil bases for lubricants. The products based on vegetable oils can constitute an alternative for those of mineral origin. However, vegetable oils are characterized by different properties than mineral oils. The most essential issue is the fact that biolubricants are free of sulphurcontaining compounds that can have an unfavourable influence on the health of human beings. The wear measurements were conducted on a block-on-ring test stand T-05. In the sliding pair lubricated with vegetable oils, steel specimen interacted with a counterpart made of bearing alloy. In the second variant of a friction pair, a steel ring specimen with a boronized surface layer was used. The changes of the surface roughness of the specimen and counterpart during operation were evaluated. In the comparative evaluation, the best results were obtained choosing the sample with the hard layer lubricated with soybean oil. In this case, the observed wear of the surface of sliding pairs was the lowest. The lowest friction force and the lowest temperature of the elements of the friction pair also corresponded to this. The application of the TiB2 layer allows reducing the wear of both the sample with the layer and the counterpart with the bearing alloy layer.<br/><br/>
Authors and Affiliations
Wojciech SZCZYPIŃSKI-SALA, Janusz LUBAS
Wpływ adhezji na rozkłady ciśnienia i siły nośne walcowych mikrołożysk
Przedmiotem pracy jest wyznaczanie metody numerycznego wyznaczania rozkładu ciśnienia hydrodynamicznego w poprzecznym walcowym mikrołożysku ślizgowym. Rozpatrywane są mikrołożyska o średnicach wału około 1 milimetra. Sup...
MODIFYING THE OPERATING CONDITIONS OF FRICTION PAIRS WITH SOLID LUBRICANT BASED ADDITIVES
The article presents the results of tests into the application of additives based on solid lubricants of copper, lead, and molybdenum disulphide to AN68 and CE / SF SAE 15W/40 lubricating oils. The test results were coll...
Właściwości tribologiczne warstw typu duplex otrzymywanych poprzez uszczelnianie w kwasie bursztynowym
W pracy przedstawiono właściwości tribologiczne warstw typu duplex otrzymywanych na stopie aluminium EN AW-5251 metodą anodowania twardego aluminium w elektrolicie wieloskładnikowym oraz poddanych procesowi uszczelnienia...
WEAR OF Si OR B DOPED AMORPHOUS CARBON COATINGS
The paper describes a complex wear research on DLC (amorphous carbon) doped with boron (B) and silicone (Si). The tests were carried out in two different sliding systems: flat–on–flat (ring contact, unidirectional slidin...
THE ASSESSMENT OF TRIBOLOGICAL PROPERTIES IN ROLLING-SLIDING CONTACT IN RECIPROCATING MOTION ON A DEVICE FOR SURFACE WEAR TESTING
The paper presents wear tests of a sample made of rail steel in a reciprocating motion on an experimental apparatus for surface wear testing. Professional machines for wear tests of rolling-sliding contact, whose main ta...