APPLICATION OFVISUALTEST METHODS LOADED ELEMENTS OF ROTATING MACHINERY FLOWTOASSESS THEIR CONDITION
Journal Title: Scientific Journals of Silesian University of Technology. Series Transport - Year 2016, Vol 2016, Issue 90
Abstract
The article presents the aims and objectives of the process of non-destructive testing of turbine aircraft engines using visual methods indirect use of endoscopy. Presents brief characteristics of the construction of engines tested, analyzed the diagnostic procedures used in non-destructive testing methods are shown diagnostic equipment used in research. The paper presents examples of the results of diagnostic checks obtained for the test aircraft engine.
Authors and Affiliations
Jan WARCZEK, Mateusz JUZUŃ
Keywords
Related Articles
- EP ID EP117754
- DOI 10.20858/sjsutst.2016.90.17
- Views 64
- Downloads 0
ANALYSIS OF COMBINED POLYSURFACES TO MESH SURFACES MATCHING
This article applies to an example of the process of quantitatively evaluate the fit of combined polysurface (NURBS class) to a surface mesh. The fitting process of the polysurface and the evaluation of obtained results...
USING OF ACTIV THERMOGRAPHY AND LOCK-IN METHOD WITH ULTRASOUND EXICATION FOR DETECTION OF MATERIAL DEFECTS
The main purpose of paper is presented an innovative approach in the field of infrared thermal imaging and its integration into the area of engineering applications. Test specimens with different shapes have been chose...
OPPORTUNITIES FOR DEVELOPING INTEGRATED RAIL – ROAD PASSENGER REGIONAL TRANSPORT IN THE LIGHT OF THE NEW LAW ON COLLECTIVE PUBLIC TRANSPORT
The rapid development of individual motorization phenomenon has caused a steady decline in passenger public transport, especially prominent in regional transportation. This phenomenon has been observed in Western Eu...
MODELOWANIE I ANALIZA PODESTU RUCHOMEGO W WARUNKACH JEGO PRACY
Praca dotyczy opracowania modelu obliczeniowego podestu ruchomego firmy HAULOTTE, typu H1150E. Model został opracowany z wykorzystaniem metody elementów skończonych MES, za pomocą programu SolidWorks. Stworzony model umo...
SPOSOBY PRZEMIESZCZANIA NA WYBRANYM OBSZARZE MIEJSKIM – POTRZEBY I MOŻLIWOŚCI
W artykule porównano różne sposoby przemieszczania się w mieście. Wskazano także czynniki mające wpływ na wybór środka transportu. W drugiej części pokazano możliwości zastosowania technologii GSM/GPS/GIS jako źródła poz...