Application Waste Sawdust as Mixed Polyurethane Insulation in Traditional Cold Storage of Fishing Vessel
Journal Title: International Journal of Marine Engineering Innovation and Research - Year 2017, Vol 1, Issue 2
Abstract
In the process of fishing it takes some supplies such as fishing equipment, instrumentation and storage of fish. The traditional fishermen of their fishing days fishing usually only bring ice cubes. Solid plastic polyurethane foam is a mixture solution of polyols and isocyanates, commonly used as an insulating material storage. From the observation waste generated being sawmill sawdust per spindle with diameter of 30 cm and a length of 1 m with 5 times sawmill, Saws 0.8 cm thick produced 0.0088 m³ / burnable logs only discarded. Therefore takes thermal conductivity test to review mixture of sawdust and polyurethane comparison with variations different dosing. Maximum disposals sawdust can be done is 40% of the total volume of material mixture, polyurethane and sawdust because composite material (sawdust-polyurethane) can not be bond with good so easy slab separately from origin form. Thermal Conductivity insulating good and economical on disposals 40% wood flour (0.05252 W / m°C) and is able to maintain a 2 kg of ice crystals melt up perfect on 34 hours. Operating profits economical from 4,8 m³insulation composite application with obtained Rp 4.486.000 compared with 100% Polyurethane Insulation Manufacture.
Authors and Affiliations
Sutopo Purwono Fitri, Muhammad Badrus Zaman, Dwi Priyanta, Mochamad Hidayat
Keywords
Related Articles
- EP ID EP220067
- DOI 10.12962/j25481479.v1i2.1996
- Views 435
- Downloads 1
Damage Analysis of Elbow Fitting at Condenser Air Conditioning Cooling System
Elbow fittings is one type of fitting on the piping installation that serves to change the flow direction. With the sudden flow of changes, it will affect the physical condition of the elbow. The flow changes in the elbo...
Analysis of Electrical Power Consumption in Container Crane of Container Terminal Surabaya
Container crane electrification is a re-powering process of container cranes from diesel to electricity. In electrification process, it is required an analysis of electrical power consumption that is needed in the operat...
Validation of Engine Performance for Tests on Ballast Water Heat Treatment Using Engine Waste Heat
Heat treatment has been considered as a suitable option for treatment of ballast water. Utilizing the waste heat from the diesel engine fresh water and exhaust gases would be an economic option. For recovering the heat f...
Analysis of Lift and Drag of Mono-foil Hysucat due to Longitudinal Foil-placement Variation
CFD simulations were conducted to study the effects of a hydrofoil and its relative placement in the longitudinal direction on the total resistance of a mono-foil hysucat (hydrofoil supported catamaran). Three foil posit...
Development of Load Characteristic for The Main Engine and Its PLC Compatible Preparation in Cooperation with The Water Brake as The Generator
Water brake can be used in any application where a load brake is required on a rotational load. In the engine industry, dynamometer is used in conjunction with a power source and instrumentation to determine engine HP, T...