Applied Model of Assessment of Intensity of the Stressed Deformed State of Pipelines by Evaluation of Magnetic Anisotropy of Coercive Forces. Part 1
Journal Title: Український журнал із машинобудування і матеріалознавства - Year 2017, Vol 3, Issue 1
Abstract
The problem of applied diagnostics, statistically rigorous by the proposed model analogue, running stressed-deformed state of the main (trunk) shell is studied by the method of magnetic coercimetria. The relationship between the parameters of the loop of magnetic hysteresis is stochastically related with structural and mechanical state of the material of the pipeline wall and with the rest of equal conditions allows to effectively detect the zone of concentration of local stresses on the stage of their forming and development (propagation) on the basis of quantitative comparative analysis of their value with calculated equivalent mechanical stresses in principal (main) planes for particular pipe material considering that the operational stresses shouldn’t be larger than 30–50 %of the yield limit. The hypothesis H0 about the possibility of description of the measurement data of the stressed mechanical state by the magnetic-static method of coercimetria is made taking into account the peculiarities of disturbances caused by the operation of electric chains of the measuring apparatus during its metrological calibration. This hypothesis confirms that the arcsine function is a law of distribution probability density of the measured values of the coefficient of magnetic anisotropy as a response of the mechanical state of the pipe shell, that the parameter Q equals 0.95 on the confidence level and substantiates the evaluation of frequency of the influencing equivalent stresses in the whole range of loads applied to the shell by the inside normalized variable pressure. On the basis of corresponding scaling and renormalization of investigative values of the coefficient of magnetic anisotropy, the technique of determination of the level of mechanical stresses in the object of diagnostics is developed and the statistically rigorous compatibility in the certain range of influence of internal pressure in the pipeline is demonstrated using the results of preliminary metrological calibration of coercimeters obtained for different pipe steels.
Authors and Affiliations
Volodymyr Biloborodchenko
Analysis of Structure and Kinematics of Four-Bar Crank-Rocker Walking Mechanism
Problems and prospects of using the walking mode for producing motion of robotic systems are considered. Advantages and spheres of the use of mobile robotic systems equipped with walking movers are substantiated. Prefere...
Semi-active vibration absorbers for the high-rise objects
To determine the optimal parameters of the dynamic vibration absorber (DVA), a complete multi-parameter model of the dynamics of machines and structures is required. A model with two degrees of freedom is unacceptable fo...
Theoretical foundations for the development of experimental equipment for determining the load capacity of speed change devices
The article gives the theoretical base for construction of equipment for experimental research of static, kinematic and dynamic characteristics of devices for speed change by epicyclic gear trains with closed circuit hyd...
Substantiation of inertial, stiffness and excitation parameters of vibratory lapping machine with linear oscillations of laps
Problem statement. Designing and manufacturing of efficient resonant vibratory lapping machines with linear oscillations of laps demand an accurate and detailed calculation of parameters of their elastic systems and elec...
Applied Model of Assessment of Intensity of the Stressed Deformed State of Pipelines by Evaluation of Magnetic Anisotropy of Coercive Forces. Part 1
The problem of applied diagnostics, statistically rigorous by the proposed model analogue, running stressed-deformed state of the main (trunk) shell is studied by the method of magnetic coercimetria. The relationship bet...