APPLYING PHOTOELASTICITY WITH OPTICAL MAGNIFICATION METHOD TO INCREASE PRECISION OF DETERMINING FRINGE ORDER UNDER MONOCHROMATIC LIGHT
Journal Title: Journal of Mechanical Engineering Research & Developments (JMERD) - Year 2019, Vol 42, Issue 3
Abstract
Photoelasticity method was used to measure strain and stress fields to address the precision problem of determining fringe order of loading and cracking and notch areas. In this study, microscope was used as an additional tool in a photoelastic device for magnification of isochromatic fringe size. An experimental method was used by utilizing optical system and reflective polariscope. A simple compression tool was designed to provide a compression load on the solid disk-shaped specimens. Isochromatic fringe field was observed in the loading zone for different loading and captured image based on the following conditions: 9x, 15x and 20x without magnification and with magnification using SLR type Nikon camera Serie D3000. The image was processed using OpenCV software while C + + was used to produce clearer isochromatic fringe pattern formed on the surface of the specimen in the determination of the maximum fringe order observed. The average of additional fringe could be obtained as the optical magnification result. Data was analyzed using Finite Element Analysis Software. The result showed an increasing trend in fringe order with increasing levels of optical magnification. Its maximum value was obtained on20x optical zoom, which was 2-order fringe.
Authors and Affiliations
M. B. H Sitorus, Melvin Emil Simanjuntak, Agus Sigit Pramono, Henry Lumbantoruan, Udur January Hutabarat, B. Ginting, Piktor Tarigan, Teng Sutrisno
Keywords
Related Articles
- EP ID EP572189
- DOI 10.26480/jmerd.03.2019.55.61
- Views 85
- Downloads 0
EFFECT OF ANISOTROPIC MATERIAL ON THE GEOMETRIC NON-LINEAR PERFORMANCE ANALYSIS OF SMART LAMINATED COMPOSITE PLATE INTEGRATED WITH DISTRIBUTED AFC PATCHES
The present study focuses on the effect of anisotropy on thin laminated composite plates as smart structure with distributed AFC patches using ACLD treatment, and analysis is carried out for geometrically nonlinear trans...
COMPUTER WITH CHANGEABLE ARCHITECTURE
The relevance of this article is that, despite the rapid development of computer technologies, it has not been yet invented the architecture that did not have vulnerabilities for hacker attacks. The purpose of the paper...
PERFORMANCE OF LOW-COST DUAL CIRCUIT SOLAR ASSISTED CABINET DRYER FOR GREEN BANANA
A low-cost solar cabinet dryer was designed to dry green banana. The dryer was made of low-cost material readily available locally. The dryer consists of two types of solar collector (air and fluid collectors), water tan...
THE FAULT LOCATING SYSTEM OF THE HIGH-SPEED MAGLEV TRAIN
Analyzing and researching the levitation and guidance sensor fault location system of high-speed maglev train, we developed an offline testing method of sensor fault location system, which can carry on the fast positioni...
CFD SIMULATION OF SAWDUST GASIFICATION ON OPEN TOP THROATLESS DOWNDRAFT GASIFIER
Sawdust is one of alternative energy sources to substitute the fossil fuels. The utilization of sawdust to produce energy can be done through different types of technologies. Gasification is one of techonology that can b...