APPROACH TO FERROMAGNETIC SATURATION FOR AMORPHOUS FE-BASED ALLOY
Journal Title: Prace Instytutu Metalurgii Żelaza - Year 2018, Vol 70, Issue 3
Abstract
The paper presents the results of research on the structure and selected properties of magnetic alloys based on Fe. The alloy with the chemical composition Fe36Co36Y8B20 was produced using two methods: forcing and sucking the liquid alloy into a copper mould. The alloy was cast in the form of 10 mm × 5 mm × 0.5 mm tiles. The structure of the obtained alloys was examined using X-ray diffraction. The measured diffractograms are typical for amorphous materials. Using the Faraday magnetic balance, the magnetic saturation polarisation curves as a function of temperature were recorded. The Curie temperature of the created alloys, which amounted to approximately 750 K, was determined on the basis of numerical analysis. The original magnetisation curves and static magnetic hysteresis loops were measured using a vibration magnetometer. The produced alloys had a saturation magnetisation of about 1.1T and a coercive field value of about 200 A/m. The curves of primary magnetisation were analysed using H. Kronmüller’s theory. It was found that the magnetising process in the area called the ‘approach to ferromagnetic saturation’ is related to the rotation of the magnetisation vector around the linear defects of the structure.
Authors and Affiliations
Bartłomiej Jeż, Marcin Nabiałek, Kinga Jeż
Keywords
Related Articles
- EP ID EP432171
- DOI 10.32730/imz.0137-9941.18.3.05
- Views 92
- Downloads 0
EFFECT OF AUSTENITISING ON THE STRUCTURE AND PROPERTIES OF LOW-ALLOY Cr-Mo-V STEELS AFTER LONG-TERM OPERATION IN CREEP CONDITIONS FOR THE POWER INDUSTRY
The article concerns the revitalising heat treatment of components of the pressure part of power units operating under creep conditions. The possibilities of “recovering” the structure and functional properties similar t...
LABORATORY STUDIES ON THE DEVELOPMENT OF COMPOSITE PELLETS FOR DEEP REFINING OF STEEL FROM NON-METALLIC INCLUSIONS
The paper presents the laboratory research on the development of a new type of refining materials in the form of composite pellets for deep refining of steel from non-metallic inclusions, measured by the total oxygen con...
WYBRANE WŁAŚCIWOŚCI MECHANICZNE I TECHNOLOGICZNE WYSOKOWYTRZYMAŁYCH NANOSTRUKTURALNYCH STALI BAINITYCZNYCH
W artykule omówiono zagadnienie optymalizacji parametrów technologicznych wytwarzania stali nanostrukturalnej umożliwiających skrócenie czasu wygrzewania izotermicznego oraz uzyskanie wysokiej wytrzymałości i plastycznoś...
EFFECT OF INITIAL STRUCTURE AND COLD DEFORMATION ON THE STRESS – ELONGATION CURVE OF DUPLEX STAINLESS STEEL (α + γ) IN A STATIC TENSILE TESTING AT 850°C
The results presented in the article concern the effect of structure and cold deformation on the behaviour of a high-alloy duplex stainless steel (a + c), grade X2CrNiMoN22-5-3, in tensile tests at 850°C at a rate vr = 1...
Гендерна політика у сфері вищої освіти: проблеми нерівності та шляхи їх вирішення.
У статті проведено аналіз гендерної нерівності у системі вищої освіти країни, виявлено наявну горизонтальну та вертикальну сегрегації. Представлено статистичні відмінності щодо гендерного представ...