Astabilizing system for butter pastes based on the dry concentrates of milk protein
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 5, Issue 11
Abstract
<p>The composition of the stabilizing system for butter pastes based on dry concentrates of milk and whey proteins has been substantiated; that would help reduce the deficiency of protein in the diet of modern human and would make it possible to further improve the balance of the composition of the butter paste.</p><p>Considering their functional-technological characteristics, conditions for gelation and synergy, the polysaccharides carrageenan and guar gum were introduced to the composition of the stabilizing system.</p><p>The dynamics in the gradient of the limiting stress of protein and protein-polysaccharide systems have been studied. We established that gels based on the dry concentrate of milk protein are the plastic systems, they have sufficient strength and possess thixotropic properties. In order to reduce the quantitative content of the stabilizing system in the production of butter paste with a structural frame similar to that of butter, we introduced carrageenan to the system. However, an increase in its concentration led to the formation of strong cross-linked gels unsuitable for the production of butter pastes. Increasing the stability of the system against the "freeze-defrost" cycles could be achieved by the introduction of guar gum. Based on the indicator of the limiting stress at a variable deformation rate of the model samples, a rational ratio of the components in the stabilizing system was established. Its composition includes: milk protein concentrate: whey protein concentrate: guar gum: carrageenan: 10:3.0:0.3:0.05.</p><p>The rational concentration of the stabilizing component based on skimmed milk was determined, which was 13.35 %.</p><p>The water activity indicator is determined for the model samples of the selected stabilizing substances and mixtures in certain ratios. Stabilizing substances have been shown to exhibit the pronounced moisture-retaining properties, which increase at their combination.</p><p>The effectiveness of the developed system is proven based on indicators for the water activity and enthalpy of the system. The indicator of water activity for the butter paste with a 40 % mass fraction of fat was 0.981, which is close to the respective indicator for the butter with a mass fraction of fat of 72.5 % (control) ‒ 0.979. The enthalpy index of the butter paste was 61.35 J/g; for control, it was 61.13 J/g. This is due to the additional bonding of moisture by the functional groups of components in the protein-polysaccharide complex, indicating the thermodynamic stability of the butter paste.</p>The efficiency of application of the developed system in the technology of butter pastes has been determined: indicator of heat resistance of the butter paste with a mass fraction of fat of 40 % was 0.87 (control, 091), the size of droplets in the aqueous phase at the cut did not exceed 0.2 mm
Authors and Affiliations
Oksana Kochubei-Lytvynenko, Olha Yatsenko, Nataliia Yushchenko, Ulyana Kuzmyk
Keywords
Related Articles
- EP ID EP528228
- DOI 10.15587/1729-4061.2018.143105
- Views 71
- Downloads 0
Effect of evaporator-condenser diameter ratio (d/D) on thermal performance of the tapering heat pipe with various heat sources
<p class="MDPI17abstract">In the present study, a new tapering heat pipe design had been developed to enhance the thermal performances. Boiling visualization in the tapering heat pipe is investigated to provide the detai...
A study of electrochromiс Ni(OH)2 films obtained in the presence of small amounts of aluminum
<p class="1">The research is related to the synthesis of electrochromic films of nickel hydroxide with aluminum as a dopant. Films were deposited via cathodic template synthesis in the presence of polyvinyl alcohol from...
Improving efficiency of machining the geometrically complex shaped surfaces by milling with a fixed shift of the cutting edge
<p>In order to improve efficiency of machining by milling geometrically complex shaped surfaces, mainly the methods related to improvement of properties of the tool material, change of composition and properties of the t...
Effect of heat treatment and cryogenics on hardness of ductile cast iron microstructure (FCD50)
<p>The results of researches of possibilities of increasing the mechanical properties of pig iron with ball-bearing graphite of brand FCD-50 by the combined heat treatment are described. The scheme of multistage heat tre...
Stabilization of the natural color of sweet pepper (Capsicum annuum L.) during its processing
<p class="a">The influence of various parameters of technological treatment on the degree of chlorophyll destruction and change in the green coloration of the sweet pepper (Capsicum annuum L.) has been investigated. It h...