Austenite transformation simulation for a controlled rolling processing technology development
Journal Title: Archives of Mechanical Technology and Materials - Year 2018, Vol 38, Issue
Abstract
Using an originally-developed computer model and appropriate software the impact of deformation on austenite phase transformation in low carbon alloyed steel was carried out. The computer simulation takes into account an impact of deformation degree and takes into account non- constant cooling rate. That makes it useful for development of thermal and deformation technological processes development. Based on the simulation results a technology of controlled rolling of low carbon steel alloyed by carbide forming elements (Nb, V, Ti) was developed. The proposed technique allows production of rolled steel sheets with high strength and plastic properties, as well as high impact strength in normal and low temperatures.
Authors and Affiliations
Vladislav Kaverinsky
Keywords
Related Articles
- EP ID EP536178
- DOI 10.2478/amtm-2018-0006
- Views 72
- Downloads 0
Open loop control of piezoelectric tube transducer
This paper is focused on the open loop control of a piezoelectric tube actuator, hindered by a strong hysteresis. The actuator was distinguished with 22 % hysteresis, which hinders the positioning of piezoelectric actuat...
APPLICATION OF VISUAL SYSTEM FOR HAND CONTROL OF 3D MANIPULATOR
The article concerns controlling of a 3-axles manipulator by hand movement, recognized by visual system. In the investigations the Kinect sensor was used, which enabled the acquiring of 2D hand images with depth paramete...
Determination of emissivity coefficient of heat-resistant super alloys and cemented carbide
This paper presents the analysis of emissivity engineering materials according to temperature. Experiment is concerned on difficult to machine materials, which may be turned with laser assisting. Cylindrical samples made...
INFLUENCE OF PLASTICIZER TYPE ON PROPERTIES OF RENEWABLE ENGINEERING MATERIALS
Polymers and their composites are commonly used as engineering materials. They reveal a number of beneficial properties that allow their use in many industries. However, the main disadvantage of polymeric materials is th...
Comparison of various tool wear prediction methods during end milling of metal matrix composite
In this paper, the problem of tool wear prediction during milling of hard-to-cut metal matrix composite Duralcan™ was presented. The conducted research involved the measurements of acceleration of vibrations during milli...