Automated Mechanism for Retrieval of Spectrocoin Sample from Copper Die
Journal Title: Bonfring International Journal of Industrial Engineering and Management Science - Year 2018, Vol 8, Issue 2
Abstract
Our project is designed to fabricate the automated mechanism for retrieval of spectrocoin sample from the copper die.The main objective of this project is to design the copper die with a pneumatic connection in easier way to obtain the spectrocoin. At present in industries they use manual connectors for joining the two copper die so that the molten metal can be poured into the copper die.After some time interval removing the copper die the molten metal poured in a die is obtained like a metal coin then it is chilled by dropping it into the water container. After few minutes the coin is been taken and grinded on both the surface then they analyze in the atomic spectrocoin analyzer by passing argon gas in the coin the spark is obtained is analyzed by the analyzer software and gives the metal composition of the material in percentage .The problem of loading and unloading consumes more time. Which the coin is identified as problem and we suggested the solution in this project. Now we have design the alternative by opening and closing of copper die by connecting them with an pneumatic cylinder controlled setup hand lever the air is passed through the cylinder the copper die starts working it is controlled by ONOFF by manually operated lever ejector. By pushing the ejector the coin directly falls into the water tank sump later it can be grinded and analyzed to find out the composition of materials. In the metals through our design the loading and unloading of coin is made easy for the operators and reduces time drastically.
Authors and Affiliations
Dinesh L, Elankathir B, Ajith kumar A, Dr. Muthukumaran M
Keywords
Related Articles
- EP ID EP404792
- DOI 10.9756/BIJIEMS.8362
- Views 118
- Downloads 0
Effect of Precipitation Hardening on Tensile, Fatigue and Fracture Toughness Behaviour of 8011 Al/ 15%SiCp Metal Matrix Composite
In this investigation, the effect of precipitation hardening on tensile, fatigue and fracture toughness behaviour of 8011 Al/ 15%SiCp composites has been studied. The composites were manufactured through stir casting met...
Towards Building Energy Efficiency for Developing Countries
Buildings account for 42 percent of world energy consumption, therefore the rising trend of making buildings more energy efficient is smart business with assists to make local market jobs and added benefits to the enviro...
Intergenerational Occupational Mobility of Workers in the Traditional Pottery Industries in Kottayam District, Kerala: A Critical Approach
Pottery is an age old handicraft in India. It is traced back to the earliest times of civilization. The pottery making traits was beginning back to the Neolithic era. During the times of Indus Valley Civilisation this ef...
Continuance Intention to Use Facebook: A Study of Perceived Enjoyment and TAM
The use of social networking sites has emerged rapidly as an ideal platform for social interaction. Different social networking sites are characterized according to their usage like business networking, entertainment and...
Experimental Study on Flexural behaviour of Hybrid Fibre Reinforced Concrete with Elastomeric Pads
This paper presents the effect of flexural behavior of fibre reinforced concrete with and without elastomeric pads. A total of 6 reinforced concrete beams were cast and tested in the present investigation. Concrete of M2...