Automated Switching Solar Power Grid Tie Inverter Using Embedded System
Journal Title: Bonfring International Journal of Power Systems and Integrated Circuits - Year 2019, Vol 9, Issue 1
Abstract
In this system solar power source is used to reduce the power source from the grid and this process mainly focused on switching power from one source to another during the time of low voltage from the solar power system. This system consists of embedded system, ADC, SCU, solar panel, inverter, drivers, step up transformer, switching unit, load, keypad, display, power supply, and grid in this process solar panel is used which produce DC voltage and the amount of power produced from the solar power system is monitored by the signal conditioning unit (SCU), the output of the SCU is given to the ADC. ADC is used to convert the analog signal to the digital signal. The digital signal is given to the embedded system. The embedded system is programmed to activate the driver and also display the voltage and current details through LCD. Then the DC voltage from the solar power system is converted into AC by using inverter. The inverter is controlled by the embedded system using drivers. Then the inverted voltage is boosted by using step up transformer and finally the power is supplied to the load by using switching unit. Switching unit is controlled by the embedded system by using drivers. This entire process is monitored and controlled by embedded system. In embedded system minimum and maximum limits are defined by using keypad to change the load setting. During peak sun hours between 11am-3.00pm maximum amounts of power is produced.
Authors and Affiliations
Dr. Balasubramaniam P. M, Michael Jayaraj TJ, Mounick Raj T, Venkatesh G, Vasanth Raj S
Keywords
Related Articles
- EP ID EP587665
- DOI 10.9756/BIJPSIC.9010
- Views 115
- Downloads 0
Designing of Lab View Based Electrical Capacitance Tomography System for the Imaging of Bone Using NI ELVIS and NI USB DAQ 6009
Electrical Capacitance Tomography (ECT) is a method for the determination of the dielectric permittivity in the interior of the object based on exterior capacitance measurements. The principle is based on inter-electrode...
Effect of Dimension & Material Composition on Transmission Coefficient and Tunneling Current of Double Quantum Barrier Structure with Band Nonparabolicity
Transmission coefficient, eigen states and tunneling current density of a potentially symmetric quantum double barrier structure has been numerically computed using transfer matrix technique for qualitative analysis of r...
Logical Design of Quaternary Signed Digit Conversion Circuit and its Effectuation using Operational Amplifier
In binary number system carry is a major problem in arithmetical operation. We have to suffer O(n) carry propagation delay in n-bit binary operation. To overcome this problem signed digit is required for carry free arith...
Active Power Control in Wind Driven Variable Speed Squirrel-Cage Induction Generator
This paper describes active power control in a grid connected variable speed wind electric generation system (WEG) using squirrel cage induction machine. The chosen variable speed WEG system consists of a wind turbine, s...
Implementation of Head and Finger Movement Based Automatic Wheel Chair
An automated system is to be developed to control the motor rotation of wheel chair based on head and finger movement of physically challenged person. In order to facilitate these people for their independent movement, a...