Availability estimation of navigation aids
Journal Title: Вісник НТУУ КПІ. Серія Радіотехніка, Радіоапаратобудування - Year 2017, Vol 0, Issue 69
Abstract
Ground network of waypoints has been commonly used for different navigation tasks. Detection and positioning of aircraft location line in 3D airspace are the most important of them. Aircraft location determination by signals from ground-based waypoints is a part of alternative positioning algorithms in flight management system. A new method of radio navigation aids availability in particular airspace volume has been represented in paper. It includes cylindrical model of NAVAIDS service volume according to three basic types: Terminal, Low altitude and High Altitude. Proposed method uses digital elevation model of terrain data for detection of radio sight line and availability estimation in 3D space of NAVAIDS. The simple model of diffraction process was considered to increase accuracy of the method. However, diffraction model has been used only for peaks of relief. Represented method has been used for availability areas estimation of VOR and DME waypoints network for Ukrainian airspace. Availability areas of waypoints were highlighted in contour lines according to data in Aeronautical Information Publication. Also, the total number of NAVAIDS combination was estimated and indicated in contour graph for region.
Authors and Affiliations
I. Ostroumov
Keywords
Related Articles
- EP ID EP308222
- DOI 10.20535/RADAP.2017.69.35-40
- Views 66
- Downloads 0
Designing of the optimum transfer machine for radio electronics apparatus
Designing machine for radio electronics apparatus on base complex criteria quality are suggested
Automatic EEG eye movement artifacts removal using Independent Component Analysis
Background. Eye movement artifacts contained in EEG recordings hamper a lot the automatic processing and analysis of EEG signal. Therefore, the removal of such artifacts is important stage for any further signal processi...
Computation method оf minimal cut sets for fault-tolerant systems based оn structural-automatic model
Introduction. The сomputation method of minimal cut sets for fault-tolerant structures based on structural-automatic model is presented in this work. Method. The first step of this method is the development of binary str...
The comparative analysis of blind identification methods of systems and signals
In work the comparative analysis of blind identification methods of MIMO (SIMO) - systems which is new technology of digital processing of signals is presented. This technology is used in the conditions of incomplete def...
Modeling three-dimensional crystal-like structures
Characteristics and constructional features of three-dimensional photon crystal-like structures are shown. The analysis of the structures show of good agreement experimental and theoretical results.