Bank Security System using GSM Technology with Arm 7 Processor
Journal Title: International Journal for Research in Applied Science and Engineering Technology (IJRASET) - Year 2017, Vol 5, Issue 4
Abstract
In this paper an advanced design system has been proposed to control the electrical devices in industries, homes and banks by using GSM technology. A GSM modem provides the communication interface. It transmits the protocols of the system through wireless network. The GSM Modem can accept any GSM network operator SIM card and act just like a mobile phone with its own unique phone number. Advantage of using this modem is that its RS232 port can be used to communicate and develop embedded applications. Applications like SMS Control and logging can be developed easily. This modem can be connected either to PC serial port directly or to any microcontroller. This paper gives the best solution for avoiding wastage of electrical power. Also the manual operation is completely eliminated. This project is implemented on wireless technology using GSM as it is very cheap and very easy to implement. This paper is designed to provide security for banks. In this a PIR sensor is used for identifying thieves at night time. An SMS will be sent if anyone breaks the door. If smoke is more, then the same is intimated through SMS. Keypad is used to access the door. For three wrong entries of password a buzzer will be triggered and an SMS will be sent. This project uses regulated 5V, 500mA power supply.12V dc is used for relay, 7805IC is three terminal voltage regulator which is used for voltage regulation. Bridge type full wave rectifier is used to rectify the ac output of secondary of 230/12V step down transformer.
Authors and Affiliations
Hari kumar. B, Haritha Reddy. C, Sharath Kumar. B, Sajahan. D, Sai Chandu. G
Security Threats in MANETS
Mobile ad hoc networks (MANETs) are one of the fastest growing areas of research. They are an attractive technology for many applications such as rescue and tactical operation. due to the flexibility provided by the dyn...
Noval Method for Loss Allocation in Radial Distribution Systems
this paper presents an exact method for real power loss allocation to consumers connected to radial distribution networks in a deregulated environment. The proposed method has the advantage that no assumptions are made...
Power System Stability Enhancement with Statcom Power Oscillation Damping Controller
The paper presents design and analysis of STATCOM power oscillation damping controller. The Phillips- Heffron model of the Single Machine Infinite Bus power system installed with STATCOM has been derived and the systema...
A Review: Modelling and simulation of spark ignition engines
This paper assimilates the performance and the trends in spark ignition engines and to increase their efficiency in terms of Fuel-Air ratio (FAR) using adaptive control method, maintaining the FAR (Fuel-Air Ratio) by Th...
Thermal performance Analysis Using V-Shaped Fins in Solar Absorber Plate
In the present work, it is aimed to improve the thermal performance of solar absorber plate by applying v-shaped fins on the collector surface. An experimental analysis has been done to investigate and compare the therm...