Behavior of Cold Rolling Emulsions in the Obtaining Process of Steel Strips
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2014, Vol 37, Issue 1
Abstract
The research was focused on determining an optimum rolling emulsion to be used on a cold rolling mill from Galfinband Galati Romania. In this plant are obtained steel strips with the thickness of 0.7-0.8 mm. The main parameters depending on which the performance of a lubricant varies were determined. These were: viscosity, pH, thickness of lubrificant film, size of emulsion particles and their distribution on the surface of the steel band, oil content in the lubricating emulsion, usage degree of emulsion, applying method. The characteristics of mineral oil, fresh and recirculated emulsions have been analysed and discussed. Also by macroscopy were analyzed the form of contaminants on the surface of the steel bands which originate from lubricating emulsion. Their appearance is analyzed in the report with their generating processes and the quality of the emulsion.
Authors and Affiliations
Tamara RADU, Anișoara CIOCAN
Keywords
Related Articles
- EP ID EP590611
- DOI -
- Views 98
- Downloads 0
Mechanical and Tribological Properties of TiCxOy Thin Films
The main purpose of this work consists on the preparation of single layered titanium oxycarbide, TiCxOy, thin films, deposited by d.c. reactive magnetron sputtering. The depositions were carried out from a TiC solid targ...
Influence of Normal Loads on Corrosion Behaviour of Ti-6Al-4V Alloy during Fretting in Artificial Saliva
The fretting corrosion behaviour of untreated Ti-6Al-4V alloy in artificial saliva solution was evaluated based on the change in open circuit potential (OCP) measured as a function of time. Fretting corrosion experiments...
Measurement and Analysis of Vibrations on a Cold Rolling Mill for Steel Strip
In this paper the authors made measurements and registration of vibration by using accelerometers posted on the top backup rolls. This is a new way for predict the damage in the rolling mill equipment and the precision o...
Grain Refinement in Aluminum Alloys by Acoustic Cavitation Phenomena
In this article, ultrasonic method of transmitting forced vibrations to solidifying aluminum-alloy melts is presented. In the presence of well developed cavitation situations, a fine and homogeneous microstructure has b...
Treatment of Ammonia Wastewater by Ultrasound. Part I: The Influence of the Ultrasound Energy on the Ultrasound Bath Temperature
The industrial ammonia water decontamination depending on the sample temperature is monitored by this study. The treatment was conducted by the UP100S ultrasound generator (Hielscher Ultrasound Technology, Germany), oper...