Behavioral Analysis of Thermoelectric Module under Different Configurations and Temperature Gradien
Journal Title: Jurnal Kejuruteraan - Year 2016, Vol 28, Issue 1
Abstract
This study analyzes the behavior of the thermoelectric module (TEM) in a transient status which allows natural cooling condition. The analysis mainly aims to extract energy from the ordinary heat source and convert it into useful electrical power. Several TEM configurations which involve single TEM and multi stage TEM are manipulated within the system since the previous studies only focused on single TEM behavior only. For a complete TEM behavioral analysis results, the performance of multistage TEM must be taken into account as this type of configurations is usually used in highend TEM application to produce greater voltage value. A multistage TEM that is connected electrically in series and thermally in parallel produces a higher generated voltage value compared to a single TEM. TEM temperature gradients also are changed throughout the experiment to examine how this term affects the TEM behavior. The results show that the multistage TEM contributes the highest output voltage and it depends on the number of cascaded TEM. Furthermore, a higher temperature gradient contributes to more voltage generated by the TEM. TEM analysis with heatsink is proved to have larger temperature gradient to maintain the cold side of the TEM junction. Loading effect analysis shows that the TEM system can obtain 5 V of stable voltage when the load resistor connected to the system output is 200 Ω and above.
Authors and Affiliations
Ramizi Mohamed, Azdiana Md. Yusop, Azah Mohamed, Nur Izzati Nordin
Keywords
Related Articles
- EP ID EP322016
- DOI 10.17576/jkukm-2016-28-03
- Views 114
- Downloads 0
Factors that Affect Cycling Transportation Mode for Postgraduate Students at Universiti Kebangsaan Malaysia by Logit Method
The main aim of this study is to investigate the factors that affect cycling transportation mode and give suggestions to encourage students to use these facilities to decrease the use of motorized transportation. Firstly...
Optimization of Stir Casting Method of Aluminum Matrix Composite (AMC) for the Hardness Properties by Using Taguchi Method
Aluminum matrix composite (AMC) was fabricated using stir casting with fly ash and SiC as reinforcing materials. In this work, Taguchi optimization technique was utilized to analyze the significant contributions of stir...
Microstructural Properties of Semisolid Welded Joints for AISI D2 Tool Steel
The aim of this study is to investigate experimentally the microstructural evolution of the joints using ledeburitic AISI D2 Tool Steel parts. The application of a new process of the semisolid joining of two parts of AIS...
A Novel Prototype and Simulation Model for Real Time Solid Waste Bin Monitoring System
This research deals with an exclusive solution to monitor the solid waste bin condition on real time. The system architecture is designed using wireless sensor networks. A set of carefully chosen sensors are used to meas...
Strain Behaviour in Composite Plate Girders with Imperfect Shear Connection
This paper is concerned with the experimental study on the behaviour of strain in steel-concrete composite plate girders having imperfect shear connection. A number of slender girders of practical size were loaded to fai...