Behaviour of Coupled Shear Wall Building
Journal Title: International Journal for Research in Applied Science and Engineering Technology (IJRASET) - Year 2016, Vol 4, Issue 11
Abstract
High rise building has become need of today’s era. High rise building is a structure vertically cantilevered from the ground level subjected to axial loading and lateral forces. Lateral forces generated either due to wind blowing against the building or due to the inertia forces induced by ground shaking which tend to snap the building in shear and push it over in bending. Shear walls have been the most common lateral force resisting elements for tall building besides frame systems. For building taller than 10-stories, frame action obtained by the interaction of slabs and columns is not adequate to give the required lateral stiffness. But it can be improved by strategically placing shear walls as it is very effective in maintaining the lateral stability of tall buildings under severe wind or earthquake loading. In present study twelve storied reinforced concrete building with coupled shear wall is analysed using soft tool SAP2000.The analysis done for the 2D and 3D structure by response spectrum method.
Authors and Affiliations
Mayur M. More, Ajit N. Patil, Vidyanand S. Kadam, Manoj M. More
Keywords
Related Articles
- EP ID EP22803
- DOI -
- Views 242
- Downloads 4
An Automatic Close Loop Embedded System for Real Time Monitoring of Speed and Torque of Motor
The system proposed in this project aims at monitoring the torque and efficiency in induction motors in real time by employing wireless sensor networks (WSNs). An embedded system is employed for acquiring electrical sig...
An Approach to Reduce Non-Value Added Time and Improve Process Cycle Efficiency by Implementing Project Information System
This paper depicts how Project Information System was used to eliminate Non Value Added Time in a manufacturing plant. A current Process Cycle Efficiency was measured and data for constructing the present Process Cycle...
Design of Robust Pi/Pid Controller for Two input Two Output Gas Turbine Application
In this paper, design of pi/pid controllers for the gas turbine application is proposed. The gas turbine application considered here is a TITO system which has two inputs and two outputs. In most of the industrial appli...
Irrigation System and Its Methods
This paper provides information of “Irrigation system and its various methods”. There are many old and new techniques are now available for irrigation, which includes modern technology and automation i.e. the use of sen...
Pollution Check in Vehicles and Alerting System Using Location Identifier
This paper presents automated control system for air pollution detection in vehicles. As the usage of vehicles is more in these days, pollution is increasing drastically. As a solution to the above problem we aim to bui...