Big Data Approach Application for Steel Pipelines in the Conditions of Corrosion Fatigue
Journal Title: Журнал інженерних наук - Year 2018, Vol 5, Issue 2
Abstract
This paper presents results of the use of Big Data approach and neural network for the pipelines diagnosis problem. In this case the pipeline is in the conditions of crack growth of corrosion fatigue and exposed to hydrogen. It is proposed to use graphene protective coatings. The mathematical model for estimating the changes in the effective surface energy of WPL during plastic deformation, electrochemical overstrain, polarization potential and current density of the metal dissolution reaction at the top of the crack on the pipeline surface during its mechanical loading in an aqueous electrolyte solution is given. The dissolution of the metal is considered on the juvenile surface, taking into account the anode and cathode regions based on the approaches of surface physics and electrochemistry. An element of a mathematical model is a quality functional, taking into account information flows and a sensitivity coefficient. Functional quality is used to specify the feedback between the investment project methodology and risk estimates, as well as to optimize the information flows of enterprises and improve the system of protection of metallic underground pipelines that operate under conditions of corrosion fatigue. The purpose of this project is to improve the relevant regulatory and technical documents as well as software.
Authors and Affiliations
R. M. Skrynkovskyy, L. V. Yuzevych, O. I. Ogirko, G. Pawlowski
Keywords
Related Articles
- EP ID EP416427
- DOI 10.21272/jes.2018.5(2).e6
- Views 86
- Downloads 0
Cleaning and disposal of gas emissions from the production of calcinated soda ash
The article is devoted to the issues of reducing the negative impact on the environment of the production of soda ash, which is achieved by reducing the formation of gas and dust emissions, as well as their deeper cleani...
Mathematical simulation of fluid flow and analysis of flow pattern in the flow path of low-head Kaplan turbine
The results of numerical investigation of spatial flow of viscous incompressible fluid in flow part of Kaplan turbine PL20 Kremenchug HPP at optimum setting angle of runner blade φb = 15° and at maximum setting angle φb...
Application of Rough TOPSIS Technique for the Analysis of Engineering System Failure Causes
The prioritization of the causes of engineering system failure posed to be a challenge. Therefore, there is a need to develop a tool that will be used to identify critical problems of an engineering system to facilitate...
The hypothesis of formation of the structure of surfaced metal at the surfacing based on the application of the prognostic algorithm of control the electrode wire speed
The growth of a drop in the process of surfacing by a consumable electrode is characterized by a linear dependence of the current change on time. A hypothesis has been put forward, according to which a reduction in the f...
Deletion method of image low-frequency components using fast median filter algorithm
This article proposes a computational method for removing low-frequency component of the raster image. Development of a calculation method is based on the fast median filtering. Presented method implementation removes lo...