[b] Effects of Chemicals as Impurities in Mixing Water on Properties of Concrete[/b]

Abstract

[i] The hardening of cement gives strength and durability to concrete. The impurities in mixing water may affect the setting, hardening and strength of the concrete. Great control on properties of cement and aggregates is exercised, but the control on the quality of water is neglected. The suitability of a particular source of water for making concrete can be checked by casting concrete cubes using water under question and potable water and comparing its 7 days and 28 days strength. If the compressive strength is up to 90 percent, the source of water may be accepted. The aim of the present study was to know the effect of chemical impurities in mixing water on different properties of concrete. This work was carried out for a mix of concrete with 0.473 w/c ratio using mixing water with various concentration of Calcium Sulphate (CaSO4), Sodium Hydroxide (NaOH), Calcium Hydroxide (Ca(OH))2, Ferrous Sulphate (FeSO4), and Sodium Nitrate (NaNO3) to study effect of chemical impurities on the strength development of concrete at 7, 14, 28 and 56 days. Decrease in strength of concrete was observed with age and concentration of chemical in mixing water.[/i]

Authors and Affiliations

Patil G. K. , Jamkar S. S. , Sadgir P. A.

Keywords

Related Articles

Comparative study on the Levels of Heavy Metals in the Bitter Lakes and Lake Temsah, (Suez Canal) in Relation to the Reproductive Cycle of the Rabbit Fish Rhabdosargus haffara

The concentrations of Cu, Zn, Pb, Cd, Fe, Mn, Cr, Ni and Co in muscles, liver and gonads of fish Rhabdosargus haffara from the Bitter lakes and Lake Temsah, (Suez Canal) were investigated seasonally from 2010 to 2011...

Physicochemical Assessment of Textile Effluents in Chittagong Region of Bangladesh and Their Possible Effects on Environment

This study was carried out to assess the untreated textile effluent quality in Chittagong region of Bangladesh. In order to study the different physicochemical parameters, effluent samples from fifteen selected textile...

Modified Maleic anhydride–allylpropionate-styrene terpolymer as Adsorbent for Removal Copper ions from aqueous solutions

Maleic anhydride-allylpropionate-styrene terpolymer has been modified with triethanolamine and contains carboxylic acid, carbonyl, hydroxyl, ester groups and tret.nitrogen atom, all of which are capable of interactin...

Monitoring the Status of Anionic Surfactants in Various Water Systems in Urban and Rural Areas of Tirupati, Andhra Pradesh, South India

Facile, rapid, sensitive and selective spectrophotometric method for the determination of traces anionic surfactants (AS) viz., Sodium lauryl sulfate (SLS), Sodium dodecyl sulfonate (SDS), Sodium hexadecyl sulfonate...

Role of Rose Bengal-Oxalic Acid System for Generation of Electrical Energy in Photo Galvanic Cell

Rose Bengal is used as a photo sensitizer in photo galvanic cell for solar energy conversion and Oxalic Acid is used as an electron donor in this study. The effects of various parameters like pH, light intensity, dif...

Download PDF file
  • EP ID EP130601
  • DOI -
  • Views 99
  • Downloads 0

How To Cite

Patil G. K. , Jamkar S. S. , Sadgir P. A. (2011). [b] Effects of Chemicals as Impurities in Mixing Water on Properties of Concrete[/b]. International Journal of Research in Chemistry and Environment (IJRCE), 1(1), 35-41. https://europub.co.uk/articles/-A-130601