Brief History of Switched Reluctance Motor
Journal Title: IOSR Journals (IOSR Journal of Electrical and Electronics Engineering) - Year 2018, Vol 13, Issue 1
Abstract
The generated torque ripple and acoustic noise in switched reluctance motors (SRM) can be considered as one of the major disadvantages of the motor. It is mainly due to frequent switching of phases for rotation of the motor and changes of the air gap length between the rotor and stator teeth. It decreases the average developed torque, diminish the efficiency, causes noise and vibration in the motor. So, in order to improve the performance of SRM and extend its applications in industry, it is essential to reduce these torque ripple. So far, many torque ripple reduction methods have been introduced. These have been done through changing and improving the structure and geometry of the motor or using some control strategies. This paper reviews a variety of control strategies to reduce the torque ripple in SRM. Each of the methods described in details. Different techniques are compared and the best and most efficient one is introduced.
Authors and Affiliations
Deepa Bajpai, Dr. Vivek Kant Jogi
Keywords
Related Articles
- EP ID EP388671
- DOI 10.9790/1676-1301040125.
- Views 160
- Downloads 0
Performance Analysis of Amorphous Photovoltaic Module Technology in Laâyoune -Morocco
The main objective of this work is to study the performance of photovoltaic module based on silicon amorphous technology (a-si) installed on the roof of a building 10 m high of ESTL (Morocco). The system was monitored be...
UAV Heading Control in Windy and Turbulent Conditions Using Reinforcement Learning
Due to the high non-linearity and coupling of a system model in an Unmanned Aerial Vehicle, UAV, the control of the heading has been a challenging task especially under windy and turbulent conditions. In this paper an on...
Review of HVDC Circuit Breakers Topologies.
Voltage Source Converter-High Voltage Direct Current (VSC-HVDC) is the most efficient and reliable method for electrical power transmission over long distances. The greatest challenge with VSC-HVDC system is that short-c...
Modeling And Simulation of Loads Into Existing Distribution Network System Using MATLAB/Simulink
This paper presents the detail model of load and other devices in distribution network systems (DNS). Simulation and modeling is done using MATLAB/Simulink software package. The proposed model is user friendly and can be...
Optimized Microstrip Patch Antenna (MPA) Array Design To Enhance Gain For S-Band Application
The modern wireless communication system requires high gain, large bandwidth and minimal size antenna’s which are capable to provide better performance. In this paper firstly optimized single element MPA is designed and...