Building and Validation of the Johnson–Cook Constitutive Model of Nano-Composite NANOS-BA® Steel for Armour Applications
Journal Title: Problemy Mechatroniki. Uzbrojenie, lotnictwo, inżynieria bezpieczeństwa - Year 2014, Vol 5, Issue 2
Abstract
Constitutive modeling of the NANOS-BA® steel is described in this article. Results of the experiments (quasi-static uniaxial tension and uniaxial compression, high strain rate compression with use of the Split Hopkinson Pressure Bar) are shown. On the basis of the experiments results, the values of constants of the Johnson–Cook (J–C) model for the NANOS-BA® steel were determined. Verification of the determined values of constants was described, in which the stresses and strains obtained in samples in experiments and simulations were compared. The additional verification of the determined parameter values was the comparison of the depth of penetration tests (DP tests) results of NANOS-BA® steel plates placed on the Armox 500T „witness” plate fired with a 12.7 mm B-32 projectile, obtained experimentally and in simulations. Small differences between simulation and the experiments results testify that the determined values of constants of J–C model for NANOS-BA® steel provide good agreement with experiments.
Authors and Affiliations
Adam WIŚNIEWSKI, Paweł ŻOCHOWSKI
Keywords
Related Articles
- EP ID EP62950
- DOI -
- Views 61
- Downloads 0
Koncepcja konstrukcji dwustopniowego naddźwiękowego pocisku rakietowego
Zaawansowane obliczenia z dziedziny balistyki zewnętrznej i aerodynamiki mozna przeprowadzić, wykorzystując program komercyjny PRODAS, który jest specjalizowanym narzędziem do wspomagania projektowania pocisków strzeleck...
Badania wpływu kąta uderzenia 7,62 mm pocisku pistoletowego z rdzeniem ołowianym i płaszczem stalowym na penetrację wkładów balistycznych aramidowych i polietylenowych
W artykule zaprezentowano wyniki badań próbek wkładów podstawowych do kamizelek kuloodpornych. Prace ukierunkowane były na określenie wpływu kąta uderzenia pocisku na wartość granicy ochrony balistycznej. Stosowano 7,62...
Design of Explosive Trains of Fuzes
This paper presents the examples of fuze explosive trains designing methods, on the example of 25-mm ammunition fuze. There have been described two, possible to choose, design methods for explosive trains of fuzes. The...
Specifying the Initial Conditions to Simulate the Flight of Artillery Shells
The results of field tests of 120 mm mortar have been presented in this paper. Tests were conducted with using the mortar projectile type OF-483A. The main task of investigations was experimental determination of muzzle...
Investigation of the Thermal Diffusivity of Water Applying Temperature Oscillation
The modified periodic temperature oscillation i.e. Ångström technique at scanning mode operation has been applied to perform continuous measurements of the thermal diffusivity of water. The investigations has been done a...