CALCULATING THE MAIN CHARACTERISTICS OF THE TRACTION INDUCTION MOTOR FOR ELECTRIC TRANSMISSION OF URBAN ELECTRIC BUS
Journal Title: Автомобильный транспорт - Year 2018, Vol 43, Issue
Abstract
Problem. Motor vehicles built on the basis of an electric transmission have been gaining popularity recently. The most important factors here are environmental and economic ones. For large cities these two factors are closely connected and form the requirements for modern vehicles. Goal. The goal is conducting analysis of electric motors in the context of their application in a traction electric drive of vehicles with the determination of the most promis-ing one for manufacturing electric transmissions in Ukraine; calculation of the main characteristics of the traction induction motor for electric transmis-sion of urban electric bus. Methodology. The meth-ods of theoretical foundations of electrical engineering were used in calculating electric circuits of alternating current. Also the classical methods of calculating electric cars and the theory of electric drive were used in calculating the basic parameters of a traction motor for an electric transmission. Results. Based on the expert assessment, the AIR 225M2 traction motor has been selected. The calculation of the main parameters of the selected induc-tion motor for the electric transmission of the urban electric bus has been carried out. Its main electrical and mechanical parameters have been determined and its natural characteristic has been constructed. Mechanical characteristic was built when operating in an electric transmission with an induction motor AIR 225M2 in the mode of the engine and in the generator mode with the fan load torque. Originality. The complex expert estimation of traction electric motors for electric transmission has been carried out. During this assessment, not only the electrome-chanical indices of electric motors, but also economic factors were taken into account. Practical value. The results of the conducted studies allow conducting a comprehensive expert evaluation of electric motors for an electric transmission in practice. By setting the load parameters for the traction drive it is possible to determine its mechanical characteristics, both in the motor mode and in the generator mode.
Authors and Affiliations
Shch. Arhun
Keywords
Related Articles
- EP ID EP454726
- DOI 10.30977/АТ.2219-8342.2018.43.0.36
- Views 58
- Downloads 0
SOME ASPECTS OF TRAINING SOCIALLY RESPONSIBLE ENGINEERS ABROAD
The article gives an overview of various concepts of social responsibility abroad. It is underlined that Ukrainian technical universities should borrow the best practices of ethical education from foreign countries. Anal...
MULTICRITERIA EVALUATION OF INTERNATIONAL TRANSPORTATION TECHNOLOGICAL SCHEME IN CONDITIONS OF UNCERTAINTY
The multicriterion estimation considering both basic requirements for transportation and possible risks during load delivery is proposed for planning of international transportation under conditions of uncertainty.
VISCOELASTIC STRUCTURAL MODEL OF ASPHALT CONCRETE
The viscoelastic rheological model of asphalt concrete based on the generalized Kelvin model is offered. The mathematical model of asphalt concrete viscoelastic behavior that can be used for calculation of asphalt concre...
КОРИГУВАННЯ МАТРИЦІ ТРАНСПОРТНИХ КОРЕСПОНДЕНЦІЙ ЧЕРЕЗ ЗНАЧЕННЯ ІНТЕНСИВНОСТІ ПОТОКІВ НА ДІЛЯНКАХ МЕРЕЖІ
Запропоновано методику коригування матриці транспортних кореспонденцій на основі значень інтенсивності транспортних потоків на ділянках мережі за допомогою лінійного програмування. Методика може бути використана у прикла...
АНАЛИЗ ЭФФЕКТИВНОСТИ ИСПОЛЬЗОВАНИЯ НЕФТЯНЫХ И АЛЬТЕРНАТИВНЫХ ТОПЛИВ В АВТОМОБИЛЬНОМ ТРАНСПОРТЕ
Рассмотрены основные аспекты современной топливно-экологической проблемы автомобильного транспорта и перспективы замещения нефтяных топлив альтернативными, в том числе композитными, энергоносителями. Приведены результаты...