Cause Analysis and Rectification Measures of Chongqing Rail Transit Line 1 Low-frequency Train Oscillation
Journal Title: Urban Mass Transit - Year 2024, Vol 27, Issue 8
Abstract
Objective To address the issue of low-frequency train oscillation on Chongqing Rail Transit Line 1 (hereinafter as ′Line 1′), it is necessary to analyze the causes of the oscillation and formulate appropriate rectification measures. Method The causes of low-frequency train oscillation on Line 1 are analyzed by examining oscillation characteristics, track geometry, bridge vibration, and rail profile changes, rail grinding measures are formulated. The causes of periodic rail wear from both track and vehicle perspectives are explored, and measures to address train oscillation caused by periodic rail wear are proposed. Result & Conclusion The causes of low-frequency train oscillation on Line 1 include: track geometry irregularities and bridge vibrations that do not directly cause abnormal vehicle oscillation; since the rail profile exhibiting periodic changes with a wavelength of approximately 12 meters, at higher train speeds and under rail profile periodic variation action, the lateral natural mode with a vehicle frequency of 2 Hz will be activated, leading to severe carbody oscillation. Through the rail grinding plan, the vehicle operation stability index after grinding decreases by about 0.5 compared to before grinding, with all the stability indices within the grinding section remaining below the limit of 2.5, thus alleviating the oscillation problem. The significant track geometry irregularities and the vehicle poor disturbance-resistant performance are identified as causes of periodic rail wear. The combination of rail milling and track fine adjustment measures can completely resolve the train oscillation issue caused by periodic rail wear.
Authors and Affiliations
Yanzhen ZHANG, Wenbin WANG, Xiao ZHOU, Yuanting DAI, Bin ZHU
Keywords
Related Articles
- EP ID EP742677
- DOI 10.16037/j.1007-869x.2024.08.006
- Views 11
- Downloads 0
Integrated Design of Station Electromechanical Equipment Monitoring System Based on Edge Control Logic
Objective The current urban rail transit management mode still predominantly manages lines as subjects, and the efficiency of networked management is not fully utilized. Enhancing the efficiency and effectiveness of urba...
Energy-saving Operation Optimization Strategy of Urban Rail Transit Co-phase Energy Storage Power Supply System
Objective As modular co-phase power supply devices are used in Guangzhou Metro Line 18,it is necessary to study the energy-saving operation optimization strategy of the co-phase energy storage power supply system in orde...
Research on Coverage Scheme and Key Technology of Wireless Communication for Cover Development of Urban Rail Transit Parking Lot
[Objective] The cover development design for urban rail transit parking lot is very complicated, requiring more new column grids. Moreover, after the cover development, the omnidirectional antenna set up on the roof of t...
Simulation Analysis of Segment Joint Deformation and Waterproof Performance under High-speed Train Vibration in Large-diameter Shield Tunnel
Objective To prevent water leakage issues in large-diameter shield tunnel, ensure high-speed train operational safety and normal tunnel functionality, it is necessary to carry out analysis and research on tunnel segment...
Performance Analysis of Slurry After Sewage Infiltration in Pipe Jacking Construction of Subway Station Entrances and Exits Project
Objective During pipe jacking construction, aging sewage pipes within the construction area are prone to rupture, leading to sewage infiltration into the thixotropic slurry along the soil body, thus impacting the perform...