CFD Analysis on Buble Growth and Bubble Departure in Pool Boiling
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 2
Abstract
The process of bubble nucleation, growth and detachment are simulated using volume fraction method. As the bubble grows to a certain size, it will eventually detach from an active nucleation site, especially for the case of a pool boiling of a horizontal wall. Numerical results are compared with Distilled water and with Nano fluid of different concentrations. It is concluded that the departure diameter decreases as the wall superheat decreases, while the growing time increases.
Authors and Affiliations
Keywords
Related Articles
- EP ID EP347447
- DOI 10.24247/ijmperdapr201878
- Views 71
- Downloads 0
Buckling of Cones with Imperfect Length Subjected to Axial Compression
The paper considers the effect of imperfect length on the buckling behavior of mild steel truncated cone subjected to axial compression. The contact interaction problem between the rigid plate and the cone was successful...
Numerical Analysis on Influence of Various Parameters and their Interactions on Drawability of Cylindrical Cups
Deep drawing is a complex process that is influenced by various parameters like tooling configurations, blank configurations, material properties, and forming conditions. Limit Drawing Ratio and limit strains are two par...
EXPERIMENTAL INVESTIGATION OF PERFORMANCE AND EMISSION CHARACTERISTICS OF AN IDI DIESEL ENGINE USING HOMOGENIZED WATER IN DIESEL EMULSION
A comparative experimental study on a 1.8L IDI diesel engine has been carried out to evaluate the influence of homogenized water in diesel emulsion on performance and exhaust emissions against base fuel diesel. The emuls...
A Review of Machining Characteristics in Mechanical Drilling of Super Alloys
Super alloys are extensively used in the field of aerospace to manufacture aircraft engine components such as casings, rings, seals, fasteners, turbine blades, vanes, discs, shafts, combustors and general engine hardware...
Design of Centrifugal Pump Impeller and its Effects on Cavitation
A centrifugal pump’s function is to transport fluid from one system to another system, within minimum time. Impeller is a key component in centrifugal pump, it intakes fluid through hub of impeller axially and distribute...