CFD Analysis on Twisted Tape Heat Exchanger with Hybrid Nano Particle
Journal Title: International Journal for Research in Applied Science and Engineering Technology (IJRASET) - Year 2017, Vol 5, Issue 4
Abstract
Heat exchangers are the most commonly used devices for the transfer of heat among hot and cold fluids. Hence, for the better exchange of heat between the fluids, there is a need in modifications in the design of heat exchangers. There are different methods to increase the heat transfer rate such as increasing the surface area by adding fins, inserts in the tube like twisted tapes, wire coils, baffles etc. In the present analysis, a single tube heat exchanger with the twisted tape insert is used. The twisted tapes of three different H/D ratios are inserted and change in rate of heat transfer is observed for various twisted tape inserts. With the use of nanofluid, there is an increase in heat transfer rate. Here, carbon nanotubes (CNT)-Fe3O4 hybrid nanofluid of three different volume concentrations are used as working fluid.
Authors and Affiliations
K. Lalit Kiran, L. S. V. Prasad
Keywords
Related Articles
- EP ID EP23741
- DOI http://doi.org/10.22214/ijraset.2017.4034
- Views 345
- Downloads 8
Comparative Study And Control System Design For 4 Level Tank Systems (Non-Linear) Using Pid And Brain Emotional Learning Based Intelligent Controller
Adaptive control systems have been always under extensive modern research. It has great importance in modern control systems. A lot of intelligent controllers have been modeled and are in use in modern control systems a...
Comparison of STFT and CWT for Normal subjects and OSA patient
Obstructive sleep apnea (OSA) is a potentially serious sleep disorder and is caused by obstruction in the upper airway in the presence of the breathing effort. It is characterized by recurrent episodes of upper airway (...
Low Latency NoC Router Micro Architecture using Dynamic Virtual Channel Organization
The number of cores on a chip is rapidly increased the on chip need an efficient communication structure as network on chip (NoC). The channel buffer organization of NoC uses virtual channels (VCs) to improve data flow...
A Way to Deal with Perceiving Copy of Bug Reports by Utilizing Execution of Data
Software bug is an important issue in Software Company. They spent 45 percent of cost in fixing bugs. So unavoidable step of fixing bugs is bug perceiving copy. Aim of bug perceiving copy is to assign correctly a develo...
Carrier Inferrometric Code Based Variable Rate Transmission Schemes for Satellite Communication System
The development of global satellite communication, spread spectrum communication has also been widely used in satellite communication system. Multicarrier Code Division Multiple Access (MC-CDMA) is a promising approach...