Cfd Analysis To Predict Heat Transfer Performance Of Louver Fin Radiator With Water/Eg & Al2o3 Nano Fluid
Journal Title: International Journal of Science Engineering and Advance Technology - Year 2016, Vol 4, Issue 2
Abstract
In this paper study of heat transfer in louver fin radiator and nanofluids mixing with base fluid (water+EG) has enhanced. The fins of radiator setup were made with louvers by turbulence of air flowing over it and coolant of water based nanofluid has been compared to that of base fluid in an automobile radiator. Three different concentrations of nanofluids in the range of 1%, 3% & 5% of vol. % have been prepared by the addition of Al2O3 nanoparticles into the coolant flows through the radiator elliptical cross section of tubes and air makes a cross flow with constant speed & constant flow rate in radiator. The design of louver fin element in CATIA V5R20 and analysis was done by using ANSYS R14.5workbench. To predict heat transfer characteristics of a louver fin element, the microscopic analysis employs modeling of the detailed geometry of a fin element. Numerical models for the heat transfer rate derived from the microscopic analysis. Results demonstrate that louver fins element create more air turbulence Meanwhile, increasing the Vol. concentration of nanoparticles can improve the heat transfer performance can enhance heat transfer efficiency.
Authors and Affiliations
D. Srinivasu| P.G Student Bvc Engineering College, Odalarevu, D. Santharao| Department Of Mechanical Engineering, Bvc Engineering College Odalarevu, A. Ramakrishna| Department Of Mechanical Engineering, Bvc Engineering College Odalarevu
Keywords
Related Articles
- EP ID EP16737
- DOI -
- Views 322
- Downloads 9
Effective Resource Allocation in flexible Overlay Routing
Overlay routing is the very attractive scheme that allows the improving certain properties of the routing without the need to change the standards of the current underlying routing. However, deploying overlay routing...
Control of the Output Voltage of the PV System Based DC-DC Boost Converter Using Arduino microcontroller
The main object of this paper is to design and implement a DC-to-DC boost converter that regulates output voltage to a desired value and can be used in Photovoltaic system appliances or other unregulated sources. To...
Low Complexity Reliability Based Message Passing Decoder Architecture For Non Binary LDPC Codes
Non-binary low-density parity-check (NBLDPC) codes can achieve better error-correcting performance than their binary counterparts at the cost of higher decoding complexity when the codeword length is moderate. The rec...
A New Efficient Approach for Melioration of Power Quality in Grid Interfacing with PV/Battery Hybrid System
This paper proposes grid integration of solar (PV)/Battery hybrid energy conversion system with (i) multi-functional features of micro grid-side bidirectional voltage source converter (μG-VSC) (ii) tight voltage reg...
A productive video sharing and streaming in cloud environment
While requests on video movement over mobile networks have been souring, the remote connection limit can't stay aware of the activity request. The crevice between the movement request and the connection limit, alongs...