CHANGES IN THE REQUIREMENTS OF THE AMENDED EUROPEAN LIGHTING STANDARD
Journal Title: Proceedings of Electrotechnical Institute Prace Instytutu Elektrotechniki - Year 2012, Vol 59, Issue 255
Abstract
This paper describes the changes in the requirements contained in the new Polish lighting standard BS EN 12464-1 Light and lighting. Lighting of work places. Part 1: Indoor work places that PKN published in the original language on 14th September 2011, in relation to the current lighting standards, which were published in Polish by PKN in November 2004. The paper presents the most important changes and additions proposed by the Working Group (WG 2) of the Technical Committee TC 169, the European Commission for Standardization (CEN), in relation to the previous version of the standard. These changes are made mainly due to the need to include provisions for energy efficiency improvements and environmental aspects of the Directive of the Parliament and EU Council of 6 July 2005 and Commission Regulation (EC) of March and September 2009. The revised standard contains among others, the changes in criteria for lighting design and creation of illuminance measuring grid.
Authors and Affiliations
Andrzej PAWLAK
ANALYSIS OF MAGNETIC FIELD IN PM SERVOMOTOR
The paper presents design of the PM servomotor M 718, which is designed of a solid rotor with permanent magnets mounted at its surface. The applied permanent magnet material belongs to the rare earth class NdFeB. 2D mode...
THE INFLUENCE OF LIGHT POLARIZATION ON THE WAY AND QUALITY OF ITS SPECTRORADIOMETRIC PARAMETERS
In this work Influence of light polarization on results of spectroradiometric measurements of light parameters is discussed. Test measurements are carried out, which have exerted variability of result of measurement in f...
AUTOMATIC RECOGNITION OF FLYING OBJECTS IN THERMOVISION PICTURE
The paper presents the method for the detection of low-flying objects in infrared spectral range, which is based on the analysis of a thermal scene. The thermal image of a man-made aerial object has specific features tha...
ANALIZA WPŁYWU KONFIGURACJI PANELI FOTOWOLTAICZNYCH NA WEWNĘTRZNE STRATY MOCY ELEKTROWNI PV
Konfiguracja szeregowo-równoległa paneli w Elektrowni Fotowoltaicznej determinowana jest kilkoma względami. Najistotniejsze są wymagania elektryczne dotyczące napięcia i prądu wejściowego falownika sprzęgającego z siecią...
COMB ACTUATOR DESIGNING WITH THE AID OF THE BEM LIBRARY
The BEMLAB library for the solution of external Electromagnetic Field Problems by Boundary Element Method was presented in this paper. The Green function has been modified in order to make allow the solution of 2D extern...