Characterization of organic/inorganic perovskite material CH3NH3PbI3 prepared by spray pyrolysis with moving nozzle method
Journal Title: Recueil de mécanique - Year 2019, Vol 4, Issue 1
Abstract
Methylamine lead tri-iodide (MAPbI3 or CH3NH3PbI3) is a promising organic/inorganic perovskite material in photovoltaic applications. It attracted researcher's attention for its good power conversion efficiency that stepped from 3.8 % in 2009 to up to 22 % in 2018. In this paper is reported a new low-cost method to fabricate CH3NH3PbI3 which is the spray pyrolysis with moving nozzle. Then it is reported different optical and electrical characteristics of the resulting perovskite. Results promote that a molarity of 2 moles and a processing temperature of 100°C can improve optical properties.
Authors and Affiliations
Keywords
Related Articles
- EP ID EP638395
- DOI 10.5281/zenodo.3447388
- Views 61
- Downloads 0
Definition and prediction of thermal state of cylinder assembly of an internal combustion engine: a new methodology
This study deal with a new approach for the definition and prediction of the thermal state of internal combustion engine elements. In this paper, it is well elaborated for diesel engine cylinder liner. The scientific inn...
The deformation modes of copper alloys under indenter
The instrumented indentation test has been widely used and studied because of the ease it provides for estimating the mechanical properties of materials from the force-displacement curve for miniature material volumes. D...
The positions effect of biarticular muscles on the walking fatigue of bipedal robots
The objective of this paper is to model a bipedal robot with springs like biarticular muscles and to study the positions effect of biarticular muscles on the walking fatigue of bipedal robots through the analysis of the...
Experimental and numerical evaluation of the implant-cement strength of the femoral prosthesis
This study investigated the influence of Implant surface roughness on the resistance of the implant–cement interface. Mechanical fixation at the implant–cement interface was evaluated in vitro using shear loading with st...
Temperature evaluation on a transmission by timing belt «Binder magnetic»
Transmissions by synchronous belts combine the advantages of transmissions by single belts (plates, trapezoidal or striated) due to their low weight, their low maintenance, great beaches of linear speeds and big transmis...