Characterization of thermally oxidized titanium based coating
Journal Title: Journal of Achievements in Materials and Manufacturing Engineering - Year 2016, Vol 75, Issue 2
Abstract
Purpose: Aim of the study is to improve the bioactivity of CoCr alloy upon covering the surface with titanium based coating.Design/methodology/approach: CoCr alloy was coated by cold spraying of powder mixture having a composition of 92 wt.%Ti + 8 wt.%Al. Coated samples were thermally oxidized at 600°C for 60 hours. Characterization of the coating was made by X-Ray diffraction analyses, microstructural surveys, cross-section and surface SEM elemental mapping analyses, roughness and hardness measurements.Findings: Results showed that sequential application of cold spray and thermal oxidation processes provided the multi-layered coating consisting of an inner titanium based layer and an outer oxide layer consisted of TiO2 and Al2O3. Thermal oxidation also caused the remarkable increasing in the surface hardness as compared to the as-cold sprayed state. Practical implications: Modifying the surface of CoCr metallic implants for long term success.Originality/value: Producing a multilayer coating on the surface of the CoCr alloy for biomedical application by sequential application of cold spray and thermal oxidation processes is the orginality of the study.
Authors and Affiliations
D. Cetiner, A. H. Paksoy, O. Tazegul, E. Atar, H. Cimenoglu
Keywords
Related Articles
- EP ID EP189328
- DOI -
- Views 123
- Downloads 0
Tribological study of low friction DLC:Ti and MoS2 thin films
Purpose: The purpose of this article is to characterize and compare the microstructure and tribological properties of low friction DLC:Ti and MoS2 thin films deposited on the austenitic steel X6CrNiMoTi17-12-2 substrate....
Effect of combinative cooled addition of strontium and aluminium on mechanical properties AlSi12 alloy
Purpose: The study was to determine the mechanical properties of hypo-eutectic silumin AlSi12 modified with Sr or Al-Sr alloy slow or fast cooled and in the form of a strip or powder. Design/methodology/approach: The exp...
Study on homogeneity and repeatability of single-piece flow carburizing system
Purpose: The purpose of this paper was to determine the homogeneity and replicability of carburized layers obtained by a continuous single-piece flow method. Design/methodology/approach: A series of 100 gears was carburi...
Alginate based hydrogel for tissue regeneration: optimization, antibacterial activity and mechanical properties
Purpose: In this work our aim was to reveal the relationship between sodium alginate concentration and crosslinking level, also the ratio of release of the antibacterial additives: silver nanoparticles and metronidazole....
Numerical analysis of friction welded titanium joints
Purpose: Friction welding is found to be a suitable candidate for joining the dissimilarmaterials. Numerical model would be helpful for proper selection of processing conditions.In the present work, a thermo-mechanical m...