Chloride Ion Invasion and Carbonation Property of Internal Cured Concrete with Super-absorbent Polymer
Journal Title: 河南科技大学学报（自然科学版） - Year 2019, Vol 40, Issue 1
Abstract
In view of the influence of superabsorbent polymer ( SAP) on the permeability and durability of concrete, by testing the content of chloride ions in concrete under salt water immersion-drying cycle and the carbonation depth under accelerated carbonation conditions, the effects of water pre-soaked SAP and 1% AgNO3 solution pre-soaked SAP gel-particles as internal curing agents on chloride ion invasion and carbonation property of the concrete specimens were investigated. Experiment results show that SAP and SAP-Ag particles play a role of water pump and chloride ion pump in concrete under the wet-dry cycle treatment to accelerate the accumulation and transport of Cl- in concrete, respectively. That is to say, SAP internal curing agent has a negative effect on the concrete resistance to chloride ion erosion under marine environment. On the other hand, by adding appropriate amount of SAP or SAP-Ag gel-particles, the capillary pores of concrete can be plugged to reduce the diffusion path of CO2, as the SAP gel-particles are swollen by moisture absorption, so that the carbonation resistance of concrete is improved to some extent.
Authors and Affiliations
Liran ZHANG, Xiangming KONG, Feng XING, Xiaochen FU, Biqin DONG
Keywords
Related Articles
- EP ID EP427033
- DOI 10.15926/j.cnki.issn1672-6871.2019.01.011
- Views 167
- Downloads 0
Control System Design of Plasma Filler Wire-injection Equipment
The control system of plasma filler wire-injection equipment was designed and developed according to the technological characteristics of composite plate producing process. The control system used programmable logic cont...
Sliding Friction and Wear Experiment of Wheel-Rail Materials
Taking the wheel CL60 steel and the rail U71 Mn steel as the research object, the sliding friction wear test of the wheel-rail materials was performed by using the pin-disk friction wear tester under different conditions...
Milling Force Model of Spiral Bevel Gear Milling Machine and Cutting Test
In order to improve the cutting performance of milling machine,the calculating method for instantaneous undeformed cutting width and thickness was put forward. According to the formula of instantaneous undeformed cutting...
Parameter Optimization and Simulation of Powertrain System of Pure Electric Passenger Vehicle
In order to improve the motor operation efficiency and the driving range of pure electric passenger vehicle,the parameter was matched for the power transmission system in the design process of pure electric passenger veh...
Preparation and Incident Photon-to-Current Properties of Black Titanium Dioxide Nanotube Arrays
The titanium dioxide (TiO2) nanotube arrays were synthesized through an anodization method, and the preparation process were studied through morphology characterization by scanning electron microscopy.The black TiO2 nano...