CHOSEN TRIBOLOGICAL PROPERTIES OF FeAl ALLOYS
Journal Title: Tribologia - Year 2011, Vol 238, Issue 4
Abstract
This research was focused on tribological properties of FeAl alloys. Powder and cast FeAl alloy was used in this study. The influence of the alloy morphology on its tribological properties is discussed. Tribological tests were performed at room temperature, using a T-05 testing device, under various testing conditions. HS6-5-2 tool steel was used as counter-sample. The tribological set up consisted of a ring (counter-sample) and flat surface of the investigated sample. The effect of tribological testing load on the wear and friction coefficient of the investigated materials was analysed. The obtained results indicated that the morphology of FeAl alloys has significant influence on tribological properties of these alloys and on the mechanisms of wear in particular.<br/><br/>
Authors and Affiliations
Tomasz Śleboda, Janusz Krawczyk, Sylwia Bednarek, Marek Wojtaszek
Keywords
Related Articles
- EP ID EP271510
- DOI -
- Views 38
- Downloads 0
WŁAŚCIWOŚCI SMARNE MIESZANIN OLEJÓW MINERALNYCH Z CZYNNIKIEM CHŁODNICZYM R600A W WARUNKACH SKĄPEGO SMAROWANIA
Obecnie w chłodnictwie następuje dynamiczny powrót do stosowania naturalnych czynników chłodniczych takich jak węglowodory. Są to substancje niezawierające fluoru i chloru, które przyczyniają się do powiększania dziury o...
THEORETICAL AND EXPERIMENTAL INVESTIGATION OF THE TEMPERATURE PROFILE IN HYDRODYNAMIC THRUST BEARING
In this paper, some example results of calculations focused on the assessment of pivoted pad thrust bearing operation are presented. Results were obtained with the use of a calculation technique called FSI (Fluid Structu...
WEAR AS THE CRITERION OF EVALUATION OF LUBRICANT INFLUENCE ON A TRIBOLOGICAL SYSTEM
The author presents the method and the results of investigations concerning wear measurement value of a kinematic couple as the criterion of the evaluation of lubricant influence on a tribological system.<br/><br/>
Wpływ rodzaju zagęszczacza na charakterystyki tribologiczne smarów plastycznych
W artykule przedstawiono wyniki badań wpływu fazy rozpraszanej na właściwości smarne wybranych kompozycji smarowych. Do wytworzenia smarów plastycznych użyto mineralnej bazy olejowej, którą następnie zagęszczono stearyni...
INFLUENCE OF SURFACE LASER TEXTURING ON FRICTION AND WEAR OF PTFE DURING SLIDING AGAINST STEEL
The paper presents research and analysis of PTFE wear during cooperation with steel. The surface of steel elements was subjected to laser texture. Three different patterns of texture were applied to the surface of steel...