Coating of the Lasting Moulds with Hard Alloys
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2010, Vol 33, Issue 1
Abstract
This paper presents the researches on the welded coating of lasting moulds used for casting at high melting temperatures. It shows that the coating through the flux welding with the addition of metal powders and graphite leads to a complex properties with a favorable resistance of abrasion and high temperature oxidation resistance compared to other methods analysed.
Authors and Affiliations
Ovidiu DIMA
Keywords
Related Articles
- EP ID EP647143
- DOI -
- Views 65
- Downloads 0
Influence of Rib Length on the Solidification of Cast Parts
The ribs applied to the walls of cast parts are designed for enhancing both stiffness and aesthetics. The presence of ribs modifies the conditions of heat transmission and implicitly the solidification of the alloy in th...
Decorative Composite Layers
Part of the materials used in the chemical industry, metallurgical, machine construction, can be coated, as with time it occurs either a decrease of its properties, or even a process of advanced faulting, because of the...
Improved Hardness and Tribocorrosion Properties of Nickel Coatings by Co-Depositing ZrO2 MicroSized Dispersed Phase During Electroplating Process
The tribocorrosion properties of ZrO2 – nickel microstrucured composite coatings have been studied in the following conditions: - Solution: 0.5M K2SO4; - Tribo corrosimeter: pin on disc connected with electrochemical c...
Evolution of Copper Microstructure Subjected to Equal Channel Angular Pressing
This paper aims to study bulk severe plastic deformation processes capable to produce ultrafine grain and also nanostructured 3D materials, interesting for processing in current industry. Samples of copper alloy were sol...
Influence of Atmospheric Conditions on the Mechanical Properties of Pet Rubber Composites
The aim of paper is to study the influence of environmental open air conditions on the PET-rubber composites. Two set of samples (Type I, Type II) were obtained with the same composition, but the composites of Type I are...