Hydrodynamic Aspects on EAF’s Smelt Metallic Mirror
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2008, Vol 31, Issue 1
Abstract
Using the Physical and Mathematical knowledge, a new approach to EAF bath’s hydrodynamic aspects is proposed to be developed in this paper. Experimental results and a mathematical equation package have been concluded that the metallic bath mirror has a ondulatory surface during steelmaking process. The shape of slagmetal interface depends on resultant of wave interaction. A higher contact surface between slag and metal correlated with a good velocity of the melted material, lead to a better exploitation of EAF.
Authors and Affiliations
Ruxandra Ioana MUSTAŢĂ, Costică T. MUSTAŢĂ
Keywords
Related Articles
- EP ID EP660917
- DOI -
- Views 46
- Downloads 0
Study of Zro2/Co-Deposition with Cobalt from Chloride Electrolyte
The metal-matrix composites are materials in which the properties of a metallic host material are modified with addition of a second phase (ceramics) by electrodeposition process. The second phase can be hard oxides or c...
Nanostructured SiC-Ni Composite Coatings Obtained By Electrodeposition – A Tribocorrosion Study
The tribocorrosion properties of SiC (20nm) - Ni nanostructured coatings have been studied in pin on disc tribocorrosimeter connected with an electrochemical cell. The objectives of our study in principal is to fully und...
Methods to Reduce Gas Emissions Onboard Ships
Regarding the latest IMO requirements, the EEDI (Energy Efficiency Design Index) is mandatory to be limited as levels under IMO MEPC requirements. The paper presents some paths to reduce EEDI as are applied onboard a 555...
Influence of the Furnace Temperature in Continuous Flux Quenching on the Characteristics of Low Carbon Steel Straps
In this paper there are presented mechanical characteristics (resiliency, elongation) and structural characteristics resulted from quenching thermal treatment made on an experimental installation, in continuous flux, on...
Superior Valorisation of the Aluminium Scraps for Obtaining Complex Aluminium Master Alloys Used in Advanced Refining of Steels
The research about aluminium scraps valorisation to obtain master alloys with reactive elements (Al, Mn, Si) used for special steels refining is presented in this paper. By this way the recycling of aluminium scraps lead...