Combined Control Scheme for Monitoring Quality Characteristics
Journal Title: Analele Universitatii "Eftimie Murgu" Resita. Fascicula de Inginerie - Year 2014, Vol 21, Issue 1
Abstract
In the literature, the Exponentially Weighted Moving Average (EWMA) and Exponentially Weighted Moving Variance (EMWV) control schemes have been used separately to monitor the process average and process variability respectively. Here the two are combined and applied on simulated process with different level of variation. The control limit interval (CLI) and the average run length (ARL) were evaluated for the combined chart. The combined chart performed better than the two independently. Furthermore, an algorithm was developed for the two control charts and implemented on visual basic VB6.0. The obtained results show that the combined EWMA and EWMV control chart is very sensitive in detecting shift in production process and every shift in the process mean is always preceded by shift in the process variability.
Authors and Affiliations
K. S. , Adekeye, Bada Olatunbosun
Keywords
Related Articles
- EP ID EP459032
- DOI -
- Views 87
- Downloads 0
Influence of the Cutting Parameters on Vibration Level in Metal Turning
Cutting vibration is a phenomenon that often appears in the process of metal machining, being one of primary factors that affects the processing quality and limits the productivity enhances. The analysis of vibration in...
On a New Optical Transducer
This paper presents a new type of mechano – optical force transducer which to be used in different mechanical experimental investigations. This transducer has been integrated within a mechanical modulus, providing a usef...
The Correlation between Harmonica Indices and Noise Indicators
Environmental Noise Directive requires the use of common noise indicators in member countries of the European Union as physical quantities that describe the environment noise created by different sources of noise. The EN...
Contributions Concerning the Clock Hour Figure Utilization for the Power Transformer Diagnostic
The paper is based on a study for the diagnosis of power transformer through the signal configuration that are part of the clock hour figure code for a defect transformer. The investigations made have the purpose to comp...
Influence of Starting Cage Material upon DynamicBehaviour of Reluctance Synchronous Motors
In this paper there is studied the dynamic regime behaviour of a reluctance synchronous motor fitted out with a starting cage. There are analyzed two concrete situations: cage made of aluminium and cage made of copper. T...