Common-Mode EMI Reduction in Switching Flyback Power Supply by Implementing Cancellation Method of Heat-Sink Capacitor
Journal Title: روش های هوشمند در صنعت برق - Year 2014, Vol 5, Issue 20
Abstract
Electromagnetic compatibility in switching power converters which are noise sources themselves, has a special importance. Electromagnetic interference (EMI) in the form of conducted or radiated reaches to sensitive sections and interferes with their operation. On the other, electromagnetic compatibility (EMC) standards causes another forces to reduce noise in switching converters. Major part of noise is due to the common-mode (CM) current passes through parasitic elements to the circuit ground (Earth). One of the important parasitic elements from the CM noise viewpoint is the switch heat-sink capacitor (common-mode capacitor). In this paper, a cancellation method of the heat-sink capacitor via a passive circuit is proposed in a 50W isolated flyback converter and is also modeled in OrCAD software. Also, experimental measurement results of the CM electromagnetic interference in regular and proposed flyback converter prototypes are presented to examine the modeling accuracy. Based on the experimental results, significant reduction of CM-EMI is verified after applying the cancellation method of the heat-sink capacitor.
Authors and Affiliations
Mohammad Rouholah Yazdani, Maryam Fazel
Keywords
Related Articles
- EP ID EP328455
- DOI -
- Views 116
- Downloads 0
Analysis of Hybrid Reference Frame Limiting Strategy Performance in the Presence of Secondary Control of Inverter Based Islanded Microgrids
With increasing the capacity and number of distributed energy resources (DERs), it is necessary to keep them connected to the microgrid during the disturbances. Two of the most important measures for satisfying this requ...
Frequency Control in Autanamous Microgrid in the Presence of DFIG based Wind Turbine
Despite their ever-increasing power injection into power grid, wind turbines play no role in frequency control. On the other hand, power network frequency is mainly adjusted by conventional power plants. DFIG-based wind...
Designing PSS and SVC Parameters simultaneously through the Improved Quantum Algorithm in the Multi-machine Power System
As to the importance of power system performance in terms of quality, and stability, through flexible AC transmission system (FACTS) devices in power networks and coordinating these devices through power system stabilize...
Design and simulation of a new sample and hold circuit with a resulation of 12-bit and a sampling rate of 1 GS/s using a dual sampling technique
In this paper, a new sample and hold circuit (S & H) with a 12 bit resolution and sampling rate of 1 GS/s is proposed using dual sampling technique. The dual sampling technique allows the circuit to always operate in hig...
Evaluation of Starting Current of Induction Motors Using Artificial Neural Network
Induction motors (IMs) are widely used in industry including it be an electrical or not. However during starting period, their starting currents are so large that can damage equipment. Therefore, this current should be e...