Comparative Analysis of Integrating WECS with PMSG and DFIG Models connected to Power Grid Pertaining to Different Faults
Journal Title: IOSR Journals (IOSR Journal of Electrical and Electronics Engineering) - Year 2017, Vol 12, Issue 3
Abstract
In the present centaury wind propelled power generator has become the most challenging with the power system in terms of power quality and harmonic distortion control. These challenges are now overtaken by the advancement of power electronic technology with its rapid growth and improvement, leading to the growth of wind propelled power generator with variable speed. Even then the power quality has been an issue to be addressed among the researchers. In this paper, a comparative study of wind propelled power generator with PMSG and DFIG is presented. These two generator types are connected with the power system using the conventional back to back converters and the unconventional power electronic interface. To study the effect of proposed unconventional power electronic interface, tests are conducted with both generator types. Active power, reactive power and speed control are taken as the comparative factors for the tests with both type of generators by performing transient fault simulations under the condition of sudden short circuit disturbance. The comparison brings out the ways to reduce Total Harmonic Distortion at various fault locations and buses to improve the quality of power generated.
Authors and Affiliations
Sasi . C, Ramakrishna Pandiyan . K, Mohan . G
Keywords
Related Articles
- EP ID EP387213
- DOI 10.9790/1676-120302124129.
- Views 144
- Downloads 0
Hybrid Two Stage Quasi Z Source Boost Converter for Photovoltaic Applications
This paper presents a Hybrid Two Quasi Z-source(HTQZS) DC-DC converter for photovoltaic applications. These are mainly employed to full fill the demand of the voltage boost in photovoltaic applications from the lower val...
Effect of Service Quality and Infrastructure Facilities on Competency of Nautical Cadet in Maritime Simulator
The need for educational equipment, especially the simulator in this STCW convention. Not always explicitly written in either type or specification, but depicted in competency forms that must be achieved through a partic...
Modeling and Simulation of Faults in Distribution Network System Using MATLAB/Simulink
This study presents the detail integration of faults in distribution network systems (DNS). Simulation and modeling is carried out using MATLAB/Simulink software package. The suggested model is user friendly and can be u...
Voltage Sag and Swell compensation using DVR to enhance Power Quality
The quick developments in power electronic technology have made it possible to mitigate voltage disturbances in power grid. Among the voltage disturbances challenging the trade, the voltage sags are considered to be the...
Silicon Carbide Structure Material for Optical Communication
Integration of 3-D devices, IC or MEMS, often requires a handle wafer which is removed before final packaging of the devices. This process usually uses lapping, chemical etch or high temperature heating to de-bond the ha...