Comparative Analysis of Refractories for the Lining of a Non-Ferrous Metal Crucible Furnace
Journal Title: Scholars Journal of Engineering and Technology - Year 2016, Vol 4, Issue 9
Abstract
Abstract:This paper examined the effect of heat on refractories used for the lining of the wall of crucible furnace; the refractories are bricks, zirconia and alumina. Knowledge based software such as Creo-element/Pro5.0 and ANSYS workbench 14.0 were employed for the modeling and steady state thermal analysis of the furnace. A temperature of 350C was used as initial temperature of preheating and a temperature of 8000C as the pouring temperature. Maximum heat flux of bricks, zirconia and alumina were found to be 4.9967*10-8 W/m2, 6.5999*10-6 W/m2 and 6.6098*10-6 W/m2 respectively, and the maximum directional heat flux of bricks, zirconia and alumina were found to be 1.0019*10-8W/m2,1.2572*10-6 W/m2 and 1.34*10-6 W/m2 respectively. Comparatively, it was observed that, thermal loading was high in zirconia and low in alumina. Keywords:Furnace, Crucible, Non-Ferrous, Metal and Refractory
Authors and Affiliations
Joseph M. Irabodemeh, Agbomabinu Emmanuel A, Umenwa Nneka P, Emmanuel Odomagah. S, Obia Alex U, Felix Patrick. O
Effect of Calcium Carbide Wastes as Admixture in Mortar
This paper presents the results of an experimental study on the use of Calcium Carbide Wastes (CCW) as an admixture in a mortar. A mortar of ratio l:3 (cement to fine aggregate) at a constant water-cement ratio of 0.5 wa...
Structural Investigation of the Tapered Conveyor Shaft of the Small Scale Pineapple Juice Extraction Machine
In order to avoid easy failure of the screw conveyor, this article obtained part analysis based on load distribution under working conditions and gained equivalent stress and deformation under several load conditions by...
The Development Direction and Strategy of New Urbanization from the Perspective of Ecology Theory
The new urbanization development in China can't develop like some western developed countries, which have experienced the urbanization, industrialization, then globalization, informatization and are pursuing the ecology...
On Special Diophantine Triples
This paper concerns with the study of constructing a special Diophantine triples (a,b,p) such that the product of any two elements of the set added with their sum and increased by a polynomial with integer coefficients i...
The Research on High Concentration Polymer Flooding Experiment in Small Well Spacing after Polymer Flooding Rising to Economy Limit Water Cut
After polymer flooding, the difficulty of exploiting the potential for residual oil has increased further. Although high concentration polymer flooding can improve recovery further, the field testing shows that the injec...