COMPARATIVE STUDY OF EXERGY LOSS OF REFRIGERANTS DURING CONDENSATION PROCESS OF VCR CYCLE
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 5, Issue 4
Abstract
In this proposed work, analysis of change in exergy of various refrigerants who are having zero ozone depletion potential based on their properties is made by comparing the required outputs. The study is based on second law of thermodynamics in which the relation between exergy and Carnot COP of a VCR cycle is established to optimize the properties like pressure and temperatures of the specific system like condenser. The study was carried out with the starting point as the exit of compression process assuming condensation of the gaseous refrigerant without any pressure drop. Various values of change in exergy during condensation calculated for various temperatures, below saturation temperature ie. in sub cooled region of the liquid. The data plotted to obtain curves and mathematical model is proposed from data so obtained to calculate one parameter by just knowing the value of the other. Thus a relationship is establish between the degree of sub cool at the end of the condensation process to the exergy destruction for various refrigerants to compare outcome of results. In addition, a relationship between exergy drop and COP is established to optimize second law analysis of the system for different refrigerants for constant pressure condensation process in a vapour compression refrigerant cycle.
Authors and Affiliations
Shreekant Tare
Keywords
Related Articles
- EP ID EP143789
- DOI 10.5281/zenodo.50339
- Views 64
- Downloads 0
Business Viability of off Grid Hybrid Biomass model over on Grid Solar Generation for RE in Developing countries
This paper outline the business viability of Distributed or Stand-alone hybrid power system consisting of Biomass and Diesel versus Traditional Top down grid connected solar power generation. The environment cons...
STRESS REDUCTION BY INTRODUCING STRESS RELIEVING FEATURES OF SPUR GEAR USED IN LATHE HEADSTOCK
This paper deals with the reduction of contact stresses of the spur gear and pinion used in headstock of a lathe machine by introducing stress relieving feature of different shapes i.e. circular hole, elliptical hole and...
Effect of Micro Silica on the Strength Properties of Waste Plastic Fibre Reinforced Concrete - an Experimental Investigation
In this paper an attempt has been made to study the effect of addition of Microsilica and replacement cement by Microsilica in different percentages on the properties of workability and strength characteristics of...
IMPACT OF SAND DREDGING AND SILT EXTRACTION ACTIVITY ON RIVER AND ITS CHARACTERISTICS : A REVIEW
The present research work highlights the influences of sand dredging and extensive silt quarrying activity on rivers. The sand dredging activity and its impact on the river processes and other river environment ha...
SOFTWARE DEFINED RADIO TECHNOLOGY - NEXT GENERATION INTELLIGENT RADIOS
This paper analyses over view of Software Defined Radio. SDR technologies are important feature for SDR communication system. Software Defined Radio (SDR) promises to deliver a cost effective and more flexible rad...