COMPARISON OF ADJUSTABLE HIGH-PHASE ORDER INDUCTION MOTORS’ MERITS
Journal Title: Електротехніка і Електромеханіка - Year 2016, Vol 0, Issue 1
Abstract
Purpose. Development of mathematical models of adjustable electrical drives with high-phase order induction motors for their merits analysis at static and dynamical modes. Methodology. At the mathematical modeling main kinds of physical processes taking place in the high-phase order induction motors are considered: electromagnetic, electromechanical, energetic, thermal, mechanical, vibroacoustic ones. Besides, functional as well as mass, frame and value indicators of frequency converters are taking into account which permits to consider technical and economical aspects of the adjustable induction electrical drives. Creation of high-phase order induction motors’ modifications in possible on the base of a stock 3-phase motors of basic design. Polyphase supply of induction motors is guaranteed by a number of the adjustable electrical drives’ power circuits. Results. Modelling of a number of adjustable electrical drives with induction motors of different phase number working on the same load by its character, value and required adjustment range is carried out. At the utilization of the family of characteristics including mechanical ones at different adjustment parameters on which loading mechanism’s characteristics are superimposed regulation curves representing dependences of electrical, energetic, thermal, mechanical, vibroacoustic quantities on the motors’ number of revolutions are obtained. Originality. The proposed complex models of adjustable electrical drives with high-phase order induction motors give a possibility to carry out the grounded choice of the drive’s acceptable variant. Besides, they can be used as design models at the development of adjustable high-phase order induction motors. Practical value. The investigated change of vibroacoustic indicators at static and dynamical modes has been determined decrease of these indicators in the drives with number of phase exceeding 3.
Authors and Affiliations
V. S. Petrushin, L. Y. Bielikova, Y. R. Plotkin, R. N. Yenoktaiev
Keywords
Related Articles
- EP ID EP290355
- DOI 10.20998/2074-272X.2016.1.07
- Views 118
- Downloads 0
V.G. Dan'ko
In the article the fault current limiter of inductive type with high-temperature superconducting coil and screen is considered. Main features of transient at occurrence of short circuit are analyzed.
DEVELOPMENT OF FUZZY NEURAL NETWORK FOR THE INTERPRETATION OF THE RESULTS OF DISSOLVED IN OIL GASES ANALYSIS
Purpose. The purpose of this paper is a diagnosis of power transformers on the basis of the results of the analysis of gases dissolved in oil. Methodology. To solve this problem a fuzzy neural network has been developed,...
A COAXIAL DISK SHUNT FOR MEASUREMENT IN THE HIGH-CURRENT CIRCUIT OF HIGH-VOLTAGE GENERATOR OF STORM DISCHARGES OF PULSES OF CURRENT OF ARTIFICIAL LIGHTNING WITH THE INTEGRAL OF ACTION UP TO 15•106 J/OHM
Purpose. Description of construction and basic technical descriptions developed and created in Research & Design Institute «Molniya» of the National Technical University «Kharkiv Polytechnic Institute» high-voltage high-...
MAGNETIC FIELD IN A GAP OF ELECTROMECHANICAL DISINTEGRATORS
The magnetic field created in an air gap of electromechanical disintegrators as a result of actions of two opposite running magnetic fields is considered. It is shown that motionless pulsing fields are as a result formed...
A METHOD OF AUTOMATIC DETERMINATION OF THE NUMBER OF THE ELECTRICAL MOTORS SIMULTANEOUSLY WORKING IN GROUP
Purpose. Propose a method of automatic determination of the number of operating high voltage electric motors in the group of the same type based on the determination and analysis of the account data of power consumption,...