Comparison of Mechanical Properties of Biaxial and Triaxial Fabric and Composites Reinforced by Them
Journal Title: Fibres and Textiles in Eastern Europe - Year 2019, Vol 27, Issue 1
Abstract
In this article, the mechanical properties of biaxial and triaxial woven aramid fabric and respective reinforced composites were investigated. Both fabrics had the same mass/m2. The first part of the experimental investigation was focused on the mechanical properties of different non-laminated aramid fabrics (biaxial and triaxial). The second part was concerned with the mechanical properties of composites made of a different combination of layers of fabric reinforced with an epoxy resin matrix in the order of biaxial+biaxial, trixial+triaxial and biaxial+triaxial. The composites were tested for tensile strength, flexural strength, strain and Young’s and flexural modulus. It can be seen from the results that the density and direction of the yarns are the most important parameters for determination of the strength of the fabric reinforced composite. The biaxial composite clearly showed better tensile strength, while the bi-tri axial order showed good flexural strength compared to the other composite combinations. These fabric reinforced composites have suitable applications in the areas of medical, protection and in the automotive industries.<br/><br/>
Authors and Affiliations
Marcin Barburski, Mariusz Urbaniak, Sanjeeb Kumar Samal
Keywords
Related Articles
- EP ID EP413800
- DOI 10.5604/01.3001.0012.7506
- Views 90
- Downloads 0
Przewidywanie właściwości dzianin lewo-prawych podczas ściskania stosując metodę elementów skończonych opartą na modelu ściskania pianki
Publikacja dotyczy analizy kompresji dzianin lewo-prawych o trzech wariantach splotów. Scharakteryzowano parametry dzianin, tj. ścisłości rządkowe i kolumienkowe, masy, zapis splotu w rzeczywistym przebiegu i na igłach....
Isolation of α-tocopherol from cotton cosmetotextiles
Cotton fabrics were treated with cosmetic substances based on α-tocopherol and cyclodextrine. Isolation of α-tocopherol from cotton cosmetotextiles was performed using three different techniques: stirring, Soxhlet and mi...
Influence of Metal Fibre Content of Blended Electromagnetic Shielding Fabric on Shielding Effectiveness Considering Fabric Weave
There are few researches reported about the influence of the metal fibre content of blended electromagnetic shielding (EMS) fabric on shielding effectiveness (SE) under different fabric parameters. In order to scientific...
Comparing Heuristic and Simulation Methods Applied to the Apparel Assembly Line Balancing Problem
In this study, general information on assembly line and simulation and researches on assembly line balancing are theoretically analysed. Afterward time studies with respect to blouse production, which will be analysed i...
Proposal for the Selection of Materials for Footwear to Improve Thermal Insulation Properties Based on Laboratory Research
The aim of this study was the analysis of the thermal resistance of upper textile materials combined with leather or textile linings. Following a comparative analysis of the combinations of materials tested, the best ins...