COMPENSATION OF SYSTEMATIC ERRORS OF DAMAGED PROBE FOR ON-MACHINE MEASUREMENT
Journal Title: Journal of Machine Engineering - Year 2018, Vol 18, Issue 1
Abstract
Spatial characteristic of triggering radius of the damaged probe for the CNC machine tools has been presented. In such case a clear distortion of the probe performance characteristic and a significant increase in probe errors have been observed. Then, to such a damaged probe, a variable speed correction method of systematic errors was used. By setting proper measurement speeds, varying for different measurement directions, errors of the probe can be significantly reduced.
Authors and Affiliations
Adam WOZNIAK, Michal JANKOWSKI
Keywords
Related Articles
- EP ID EP269972
- DOI 10.5604/01.3001.0010.8826
- Views 74
- Downloads 0
ON THE SELECTION AND ASSESSMENT OF INPUT VARIABLES FOR THE CHARACTERISTIC DIAGRAM BASED CORRECTION OF THERMO-ELASTIC DEFORMATIONS IN MACHINE TOOLS
It is a well-known problem of milling machines, that waste heat from motors, friction effects on guides and most importantly the milling process itself greatly affect positioning accuracy and thus production quality. An...
DESIGN APPROACH FOR HIGH-DYNAMIC PLANAR MOTION SYSTEMS BASED ON THE PRINCIPLE OF KINEMATICALLY COUPLED FORCE COMPENSATION
Machine tools’ feed dynamics are usually limited in order to reduce excitation of machine structure oscillations. Consequently, the potential increase in productivity provided by direct drives, e.g. linear motors, cannot...
MACHINE LEARNING IN SMED
The paper discusses Single Minute Exchange of Die (SMED) and machine learning methods, such as neural networks and a decision tree. SMED is one of lean production methods for reducing waste in the manufacturing process,...
END MILLING OF TI-48AL-2CR-2NB UNDER HIGH-FEED CONDITIONS
Gamma titanium aluminides are fast developing materials and particularly in use for aerospace and automotive components. Due to the high cutting forces and raised cutting temperatures achieved during milling of this mate...
THE EFFECT OF ALTERNATIVE CUTTER PATHS ON FLATNESS DEVIATIONS IN THE FACE MILLING OF ALUMINUM PLATE PARTS
In this paper the relationships between the alternative machining paths and flatness deviations of the aluminum plate part, were presented. The flatness tolerance of the main surface of the plate part has crucial meaning...